ICP DAS USA iCAM-760D User Manual page 78

Chapter 4

Motion: This method will trigger the Camera snapshot operation according to
the set time interval (in seconds) whenever motion is detected within
the defined days of the week and at the time of the set days. Single or 6
snapshots may be captured as defined.
Interval: the Time Lapse; Snapshot is triggered at every setting
interval time that minimum 3 seconds.
Number: Single snapshot or 6 snapshots with the setting interval (1 or
2 seconds).
Target: The stream of accumulated snapshots may be stored in the SD
Card, Remote Disk, sent to host by E-mail, FTP, activated GPIO
Output Port as preferred, or through all of them.
Setup  78
iCAM-760D User's Manual
ICP DAS