ICP DAS USA iCAM-760D User Manual page 59

Upgrade Firmware:
Upload Own Logo File:
Backup:
Upload
Reboot
Restore
iCAM-760D User's Manual
Download the latest firmware file from the website.
And upgrade firmware by executing the following steps:
1) Click the Browse button to access and select the
appropriate
2) Click the Upgrade button. The Network Camera will then
start to upgrade the existing firmware.
When upgrade is completed, the Camera will reboot automatically.
※ In
Appendix
guide you how to update camera firmware step by step.
Prepare and save the Logo Image file in the PC. Then
Follow the below steps to replace Web UI Logo with it.
1) Click the Browse button to access and select the Logo
Image file from the PC.
2) Click the Upload button to process Logo replacing.
When upload process is completed, it's strongly recommended to
close and restart Web Browser.
Clicking the Backup button allows you to manually save
Camera's parameters and user settings into a
config_backup.tar.gz
Setting: This function allows user to restore Camera's backup setting
by executing the below steps:
1) Click the Browse button to access and select saved
config_backup.tar.gz
2) Click the Restore button to process Camera configuration
restore.
System: Clicking the Reboot button allows you to manually reboot
the Network Camera.
System: Clicking the Factory Default button will restore the Network
Camera to its factory default settings status. Before Camera
system proceed to restore step, there'll be a dialog window
popped and then ask if you would like to keep "Network setting"
parameters.
Besides, all configured data in the "System Time", "Security"
and "Maintenance" tab will be remained current.
ICP DAS
firmware file from its folder.
chapter, there will be more detailed steps to
file.
file from the PC.
Chapter 4
Setup  59