ICP DAS USA iCAM-760D User Manual page 33

iCAM-760D User's Manual
Preset Point:
Auto Patrol: While Preset Points are set, you could
Auto Pan:
ICP DAS
,
,
After panning and zooming, assign the selected
area a Preset Point (1 to
button to store the setting. The pre-defined
point of view areas will be monitored in
sequence. To cancel the selection, click
Remove button.
check function to execute. Then
the camera view would automatically start to
go to the preset locations in sequence
(1->2->3->4) with the configured Time and
Speed value. Uncheck it, Auto Patrol function
would stop.
Click button to enable Auto Pan
function, then selected CH window would start
to pan automatically. Camera could use this
function to monitor any larger space without
manual panning. While Auto Pan is running,
the button is as the below camera snapshot
pictures .
The panning direction is depended on the
Camera Mount setting of Camera Video
tabbed pane.
※ While Camera Mount is set to 360°,
camera live-view would rotate with
anti-clockwise
direction.
If Camera Mount is set to 180°, camera
live-view would pan
direction.
(See the next 2 pages)
Camera Live View UI Settings  33
Chapter 3
4) and click Save
from left to right