2.3 Connecting Camera to Network
1) Be sure that your PC or laptop has connected to your local Ethernet network.
2) Be sure that IP Camera has connected to your local networking via the LAN port
(RJ45) on the cable. For this PoE model, user can use PoE Switch as power supply.
3) Use CAM FINDER software utility in CD to set up the camera (see
Camera via CAM
browser using the following default IP information:
IP: 192.168.255.2
Submask: 255.255.0.0
Gateway address: 192.168.0.1
DNS Server address: 8.8.8.8
iCAM-760D User's Manual
iCAM-760D
RJ45
②
FINDER), or directly set up the camera via the Microsoft IE
(Default Username/Password: admin/admin)
ICP DAS
PoE Switch
①
17 Installation and Setup
Chapter 2
PC/Notebook
2.4 Configuring