Video Tab - ICP DAS USA iCAM-760D User Manual

4.4.2 Video Tab

The Video tabbed pane sets the video recording trigger method.
The Video recording trigger methods:
1. Schedule
2. Period
3. Motion
4. GPIO Input
The settings about the Video event triggered
1. Recoding Length:
2. Time Lapse:
3. Target: defining the video record file target destination.

Schedule:
iCAM-760D User's Manual
This method activates the Camera video surveillance/recording
operation continuously when the defined days of the week and set
time of the set days are met. Motion is ignored with this method.
Recording Length: Each recording time-span is in accordance with
the setting value of the Recording Length (in seconds).
Target: The video record is stored in the SD card, Remote Disk as
selected or through both of them.
ICP DAS
Chapter 4
Setup  71