ICP DAS USA iCAM-760D User Manual page 74


GPIO Input:
iCAM-760D User's Manual
On the defined days of the week and at certain time of the set
days, the Camera will be triggered by its GPIO Input Signal when its
state changes.
(As for the more GPIO Signal setting, you may refer to
GPIO Tab).
Recording Length: Each recording time-span is in accordance with
the total value of Pre-event recording and Post-event recording (in
seconds).
Target: The video record may be stored in the SD card, Remote Disk,
provided to host by E-mail/FTP, activated GPIO Output Port as
selected or through all of them.
ICP DAS
Chapter 4
4.4.4
Setup  74