Motion Tab - ICP DAS USA iCAM-760D User Manual

Chapter 4

4.4.1 Motion Tab

From the Motion tabbed pane, you can define specific target areas within the
scope of surveillance to focus the motion detection function.
1. Check the "Enable Motion Detection".
3. Define the detection area.
2. Click "Add" 4. Click "Save"
button. button.
 Set up the motion detection areas:
1) Enable the Enable Motion Detection check box.
2) Click Add button and a default area Region01 will pop-up on the screen.
3) Click and hold inside the area to drag it to the location where you want to
focus detection. Resize the frame by dragging its corners or borders.
4) Click the Save button to apply the function.
5) Repeat the above steps to add more detection areas.
NOTE
Total defined motion detection areas cannot exceed 10 regions.
Setup  69
iCAM-760D User's Manual
ICP DAS