Playback Tab - ICP DAS USA iCAM-760D User Manual

4.5.2 Playback Tab

The Playback tabbed pane allows user to playback video and snapshot files
stored in the SD memory card.
These files were saved using the Event setup for video (see
snapshots
stored videos or snapshots is performed from files recorded on particular date
range as explained in the following figure.
1) Select Type: Click "Video" or "Snapshot" files to playback.
2) Set Trigger Time: Search for the files in the SD card to playback by
defining the files recording date range.
3) Click Search button: the files recorded within the date range will display
below.
4) Select the file to playback and enable the corresponding check box. The
dialog strip below will then pops up.
5) Click Open button will playback the file.
Click Save button will save file to a designated folder.
iCAM-760D User's Manual
(Section 4.4.3) with the SD card check box enabled. Playback of the
ICP DAS
Chapter 4
Section 4.4.2) and
Setup  84