Privacy Mask Tab - ICP DAS USA iCAM-760D User Manual

4.1.4 Privacy Mask Tab

3) Enable the
check box
2) Lay out masking
screens on the
areas to be
blocked from
surveillance.
1) Select a masking
shape to block
the private area
you wish to
obstruct from
surveillance.
4) Click Save
button
The Privacy Mask tabbed pane allows you to mask or block private areas from
surveillance for privacy reason.
 The steps to block the private area from surveillance:
1) Select the masking shape, e.g., "Line," "Rectangle," or "Ellipse" (see figure
above) you wish to use as screen to block the area from surveillance.
2) Click and drag the mouse cursor to lay out a masking screen on the area you
wish to block, and then release the mouse right button. Notice that the laid
out screen turns into phantom block.
3) Once the masking screen is acceptable, click the Enable Privacy Mask
check box.
4) Click on the Save button. This will turn the laid out screen into solid block.
If the laid out screen needs correction, click Delete button and redo the
masking screen lay out process.
iCAM-760D User's Manual
"Line" shape
"Rectangle" shape
ICP DAS
Chapter 4
"Ellipse" shape
Setup  50