System Log Tab - ICP DAS USA iCAM-760D User Manual

4.2.5 System Log Tab

The System Log tabbed pane allows you to see Camera's basic log on another
browser page or Remote Log Server.
Where:
Logs:
Remote Log Settings:
Status:
After setups are completed, click Save button to apply the settings.
iCAM-760D User's Manual
Click "Logs" and then there will be another browser
page opening and then displaying Camera's basic log
lists.
Check "Enable remote log" selection first; and then
manual entering IP address & port setting of Remote
Log Server.
The Status would shows "connected" or
"disconnected". The connected or disconnected of
Status tell you if the IP Address of Remote Log Server
is existence or not.
ICP DAS
Chapter 4
Setup  60