ICP DAS USA iCAM-760D User Manual page 70

6) To assign unique names to each area for easy identification, click on the area
and a Window Name text box with the default name of the selected area will
appear at the bottom of the pane (below picture). Enter a new name and click
the Save button. Wait for a while for the change to take effect.
7) To delete an area that is no longer needed but was previously saved, click on
the unwanted area and click Delete button. The area will disappear after a
while.
8) To delete multiple areas that are not yet saved, directly click the Refresh
button instead of deleting them individually. The Refresh button will
automatically clears all unsaved frames.
iCAM-760D User's Manual
ICP DAS
Chapter 4
Setup  70