Mitsubishi Electric MELSEC iQ-R Series User Manual page 84

Section 5 BUFFER MEMORY
5.3.24 Apparent power (Un\G602, 603)
The apparent power is stored.
(1) Details of stored data
(a) Storage format
Data is stored as double-word 32-bit unsigned binary in the buffer memory.
・Data range: 0 to 999999999 (0.000 to 999999.999 kVA)
* Restrictions for measured data including resolution and measuring range, refer to "3.4.1".
(b) Unit
-3 kVA *Unit is fixed.
×10
(c) Update timing
It will be updated every measuring cycle. For measuring cycle, refer to "5.2.12".
5.3.25 Multiplying factor of power factor (Un\G700)
The multiplying factor of the power factor is stored.
(1) Details of stored data
(a) Storage format
Data is stored as 16-bit signed binary in the buffer memory.
・Data range: -3 (fixed)
(b) Update timing
Because it is fixed at -3, there is no update.
5.3.26 Power factor (Un\G702, 703)
Stores the power factor.
(1) Details of stored data
(a) Storage format
Data is stored as double-word 32-bit signed binary in the buffer memory.
・Data range: -100000 to 100000 (-100.000 to 100.000%)
* Restrictions for measured data including resolution and measuring range, refer to "3.4.1".
* The sign of the data is as shown in the following figure.
Regeneration lead
180°
Regeneration lag
(b) Unit
% *Unit is fixed.
-3
×10
(c) Update timing
It will be updated every measuring cycle. For measuring cycle, refer to "5.2.12".
90°
Consumption lag
－ ＋
0°
＋ －
Consumption lead
270°
83
RE81WH