Mitsubishi Electric MELSEC iQ-R Series User Manual page 62

Section 5 BUFFER MEMORY
(b) Turn Operating condition setting request (Yn9) from OFF to ON to enable the setting.
(Refer to "4.2.2(5)".)
(2) Default value
Primary voltage (Un\G1) is set to [2: 220 V (Direct connection)].
Primary voltage of VT (Un\G5) is set to [0].
Secondary voltage of VT (Un\G6) is set to [0].
5.2.3 Primary current (Un\G2), Primary current of CT (Un\G7)
Primary current (Un\G2) set the primary current of the target electric circuit.
Primary current of CT (Un\G7) set the current of the primary side of current transformer When using primary
current of current transformer that is not in the primary current (Un\G2). Secondary current of CT cannot be
set, since secondary current of CT is fixed to 5A.
(1) Setting procedure
(a) Set the primary current and primary current of CT in the buffer memory.
Setting range is as follows: Please choose the settings to match the current sensor to be used.
When set other than "1 to 5, 501 to 536, 1001 to 1003, 1501 to 1536" the value of the primary current,
set to "0: Any current (EMU-CT5-A)" or "1000: Any current (EMU2-CT5)" primary current (Un\G2), and
set primary current of CT (Un\G7).
When the value of primary current (Un\G2) setup is set as "1 to 5, 501 to 536, 1001 to 1003, 1501 to
1536", primary current of CT is disabled.
Table 5.2.3-1 Setting value of Primary current and primary current of CT (1/2)
Primary current
(Un\G2)
Setting
Description
value
0 Any current
1 50A
2 100A
3 250A
4 400A
5 600A
501 5/5A
502 6/5A
503 7.5/5A
504 8/5A
505 10/5A
506 12/5A
507 15/5A
508 20/5A
509 25/5A
510 30/5A
511 40/5A
512 50/5A
513 60/5A
514 75/5A
515 80/5A
Primary
current of
Current sensor
CT
(Un\G7)
1～6000 EMU-CT5-A
EMU-CT50-A
EMU-CT100-A
EMU-CT250-A
EMU-CT400-A
EMU-CT600-A
0～6000
(However,
this setting
is disabled)
EMU-CT5-A
Primary current
(Un\G2)
Setting
Description
value
516 100/5A
517 120/5A
518 150/5A
519 200/5A
520 250/5A
521 300/5A
522 400/5A
523 500/5A
524 600/5A
525 750/5A
526 800/5A
527 1000/5A
528 1200/5A
529 1500/5A
530 1600/5A
531 2000/5A
532 2500/5A
533 3000/5A
534 4000/5A
535 5000/5A
536 6000/5A
61
RE81WH
Primary
current of
Current sensor
CT
(Un\G7)
0～6000
(However,
EMU-CT5-A
this setting
is disabled)