Mitsubishi Electric MELSEC iQ-R Series User Manual page 114

Section 6 SETTING AND PROCEDURE FOR OPERATION
6.4.1 Addition the module
Add the model name of the energy measuring module to use the project.
* When adding the module, it is necessary to add the module to system parameter in addition to the operation
of this procedure.
Refer to "GX Works3 Operating Manual" as to method for adding the module to system parameter.
(1) Addition procedure
Open the "New Module" window.
Select "Parameter" → "Module Information" in "Navigation" window, and right-click and select [Add New
Module...] from the shortcut menu.
Item
Module Module Type
Selection
Module Name
Advanced Mounting Slot No.
Settings
Start
Specification
Start I/O No.
* When the version of RE81WH is "A", select as below:
Module Type: Partner Products
Module Name: L00RE81WH
Set "Energy Measuring Module".
*
Set "RE81WH".
*
Set the slot No. where the module is mounted.
I/O No. If you will be set start I/O No., setting to "Set".
The start I/O number (hexadecimal) of the target module is set,
according to the mounted slot No. Any start I/O number can be set.
Description
113
RE81WH