Mitsubishi Electric MELSEC iQ-R Series User Manual page 123

Section 6 SETTING AND PROCEDURE FOR OPERATION
(2) Setting items
The data can be setup is showed below. Bold text is default setting value.
(a) Transfer to CPU
Specify the refresh destination for measurement section and waveform data section of buffer memory.
(b) Refresh timing
Set the refresh timing of the specified refresh destination.
Item
Refresh Timing
Refresh Group [n](n：
1-64)
Setting value
At the Execution
Time of END
Instruction
At the Execution Time
of Specified Program
1～64 (1)
122
Description
The refresh is performed when the END instruction
of the CPU module is executed.
The refresh is performed when the program
specified in "Group [n]" is executed.
Specify the group number of refresh group setting
of CPU parameter.
RE81WH