Determining The Necessary Installation Distances; Mounting The Transmitter - Endress+Hauser Proline Prosonic Flow 91W Brief Operating Instructions

Installation
2.3

Determining the necessary installation distances

The installation distances that are necessary for installation depend on:
• Insertion version: Clamp On with strapping band, installation in pipe
• Number of traverses or single-path/dual-path version
1 traverse
SENSOR DISTANCE
WIRE LENGTH
2.4

Mounting the transmitter

The transmitter can be mounted in the following ways:
• Wall mounting
• Pipe mounting (with separate mounting kit)
"
Caution!
• The ambient temperature range (–25 to +60 °C / –13 to +140 °F) may not be exceeded at
the mounting location. Avoid direct sunlight.
• If a warm pipe is used for the installation, ensure that the housing temperature does not
exceed the max. permitted value of +60 °C (+140 °F).
190 (7.48)
Fig. 4: Mounting the transmitter
A = Direct wall mounting, B = Pipe mounting
8
DN 50 to 4000 (2 to 160")
Clamp On (Strapping band)
SENSOR DISTANCE
POSITION SENSOR
A
Esc
- + E
80
(3.15)
2 traverses
& 185 ( 3.34)
&
mm (inch)
Proline Prosonic Flow 91W
B
Esc
- + E
a0005819
Endress+Hauser