Proline Prosonic Flow 91W
Fig. 11: Fitting the sensor housing
4.
Fix the sensor housing with the bracket.
– If necessary, the holder and sensor housing can be secured with a screw/nut or
!
Hinweis!
a lead-seal (not part of the scope of supply).
– The bracket can only be released using an auxiliary tool.
Fig. 12: Fixing the sensor housing
5.
Connect the connecting cable to the adapter cable.
the connecting cables ä 23.
This completes the mounting process. The sensors can now be connected to the transmitter via
Endress+Hauser
Installation
A0011527
A0011528
15