Endress+Hauser Proline Prosonic Flow 91W Brief Operating Instructions page 18

Installation
Fig. 16: Coating the contact surfaces of the sensor with coupling fluid
8. Insert the sensor into the sensor holder.
9. Fit the sensor cover on the sensor holder and turn until:
– The sensor cover engages with a click
– The arrows (Å /
10. Screw the connecting cable into the individual sensor.
Fig. 17: Mounting the sensor and connecting the connecting cable
the connecting cables ä 9.
This completes the mounting process. The sensors can now be connected to the transmitter via
18
Æ
"close") are pointing towards one another.
Proline Prosonic Flow 91W
A0011373
A0001115
Endress+Hauser