Assa Abloy SARGENT IN120 Installation Instructions Manual page 23

IN120 Exit Device
5 Install Cylinder
For devices without cylinder, go to Step 6.
1. Secure the cylinder by threading into lock body (see Fig. 5A).
2. Verify that the key retracts latchbolt.
6 Secure Exit Chassis
To comply with UL certifications and for security:
Fasten exit chassis to door using (4) #10 wood
screws (for wood door) or (4) #10-24 machine
screws (for metal door).
Position cylinder so that the SARGENT
logo is right-side up.
Correct Incorrect
Fig. 5B
Fig. 6
23 1-800-810-WIRE • www.sargentlock.com • A8185A
Fig. 5A
Inside of Door
(4) #10 Wood Screws or
#10-24 Machine Screws