Advertisement
11 Installation of Inside Component Assembly
1. Insert top tabs of controller into slots on mounting plate (Fig.10).
2. Ensure proper alignment of board-to-board connectors while pivoting
bottom of controller toward door until tab on bottom snaps securely
into place on mounting plate.
CAUTION: To avoid possible damage to board-to-board connectors, care should be
taken when securing controller to mounting plate. If there is resistance when
securing, detach controller to determine cause before re-attaching controller.
1-800-810-WIRE • www.sargentlock.com • A8185A
Fig. 10
16
IN120 Exit Device
Hide quick links:
Advertisement
