Installing The Aileron Servos - Seagull Models GIANT SCALE P-47 RAZORBACK 50-61cc/EP ARF Assembly Manual

GIANT SCALE P-47 RAZORBACK 50-61cc/EP ARF

INSTALLING THE AILERON SERVOS

1.
2.
Ailerons servo.
Mininum servo spec.
Torque : 110 oz-in (7.9 kg-cm) @ 4.8V;
131 oz-in (9.4 kg-cm) @ 6.0V
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
Place the servo between the mounting
blocks and space it from the hatch. Use
a pencil to mark the mounting hole loca-
tions on the blocks.
4
3.
4.
5.
Flap servo.
6.
Instruction Manual.
Use drill bit in a pin vise to drill the mout-
ing holes in the blocks.
Apply 2-3 drops of thin C/A to each of
the mounting holes. Allow the C/A to
cure without using accelerator.
C/A glue.
Use dental loss or heatshrunk tube to
secure the connection so they cannot be-
come unplugged.
1.5mm.