INSTALLING THE SPINNER
Install the spinner backplate, propeller
and spinner cone.
1.
he propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
2.
INSTALL ELEVATOR CONTROL HORN
Install the elevator control horn using the
same method as same as the aileron con-
trol horns.
1.
2.
Epoxy.
3.
Epoxy.
INSTALL RUDDER CONTROL HORN
Install the elevator control horn using the
same method as same as the aileron con-
trol horns.
37