Siemens Sinumerik 840D Series Function Manual page 6

Preface
How to use this
manual
Definition of
qualified persons
Software version
vi
Note
Hydraulics In this document, information about specific hydraulic functions
refers to functions provided by Bosch Rexroth AG.
The following guide information is provided to help you reference information in
this Description of Functions:
S
General table of contents
S
Header (as orientation aid):
- The top line of the header is the main section number
- The second line of the header is the subsection number
S
Appendix with
- abbreviations, terms and references
- Glossary (index)
For the purpose of this manual and product labels, a "qualified person" is one
who is familiar with the installation, mounting, start-up and operation of the
equipment and the hazards involved.
S
Training or instruction/permit for connecting electric circuits and devices in
accordance with safety technology standards.
S
Training and instruction in maintenance and use of adequate safety equip-
ment according to safety regulations.
S
Trained in rendering first aid.
The SW versions specified in this documentation refer to the SINUMERIK 840D
control system and the HLA module.
The Description of Functions applies only to the software versions specified.
When a new software version is released, the Description of Functions for that
version must be ordered.
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
 Siemens AG, 2003. All rights reserved
10.03