Siemens Sinumerik 840D Series Function Manual page 158

4 Firmware Drive Functions
4.13 Monitoring functions
5625 PROG_SIGNAL_ON_DELAY
Pickup delay of variable signaling function
Unit: Default:
- 0
5626 PROG_SIGNAL_OFF_DELA Y
Dropout delay of variable signaling function
Unit: Default:
- 0
4-158
Minimum: Maximum:
0 10 000
Enter the pickup delay for setting the message if the monitored quantity ex-
ceeds the set threshold (with hysteresis) (see diagram under
MD 5620, Fig. 4-21).
Note
Changing the settings in MD 5625: PROG_SIGNAL_ON_DELAY and
MD 5626: PROG_SIGNAL_OFF_DELAY affects a time watchdog that is
already running. The monitor is initialized with the new time settings.
Minimum: Maximum:
0 10 000
Enter the dropout delay for resetting the message if the monitored quantity
drops below the set threshold (with hysteresis) (see diagram under
MD 5620, Fig. 4-21).
Note
Changing the settings in MD 5625: PROG_SIGNAL_ON_DELAY and
MD 5626: PROG_SIGNAL_OFF_DELAY affects a time watchdog that is
already running. The monitor is initialized with the new time settings.
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
Cross reference: -
Related to:
Protection level:
HLA
3/3
Data type:
Active:
UNS.DWORD
Immediately
Cross reference: -
Related to: Protection level:
HLA 3/3
Data type:
Active:
UNS.WORD
Immediately
 Siemens AG, 2003. All rights reserved
02.99
10.03