Siemens Sinumerik 840D Series Function Manual page 153

02.99
10.03
5613 ALARM_REACTION_RESET
Config. shutdown response to RESET alarms
Bit 0= 0: No enable signal cancellation in response to
configuration errors
1: Enable signal cancellation in response to
configuration errors
Unit: Default:
HEX 0
5732 CL1_RES_IMAGE
Image ZK1_RES register
Unit: Default:
HEX 0
"Limit frequency
reached"
measuring circuit
5609 ENC_SPEED_LIMIT
Max. measuring velocity of linear scale
Unit: Default:
mm/min 240 000.0
Velocity controller
at limit
5605 SPEEDCTRL_LIMIT_TIME
Time for velocity controller at limit
Unit: Default:
ms 200.0
 Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
Minimum: Maximum:
0 FFFF
Minimum: Maximum:
0 FFFF
With MD 5601: ALARM_MASK_RESET can be set to conceal Reset alarms. If
the relevant bit is set to 0, the corresponding error monitoring function is active.
If the bit=1, the relevant error message is suppressed. The default setting is
active for all monitoring functions.
With MD 5613: ALARM_REACTION_RESET is set to configure changeover of
the relevant Reset alarm.
Alarm messages, see Chapter 6, numbers 300600...300699.
Minimum: Maximum:
1.0 240 000.0
The limit frequency of the measured-value conditioning hardware is monitored
with respect to A/B signals. The limit frequency is calculated from machine data
MD 5005 and MD 5609. It is approximately 100 kHz and is normally specified
by the measuring system manufacturer.
Maximum measuring velocity (MD 5609) / increments (MD 5005) = encoder limit
frequency
Example: 120 000 mm/min / 20
Minimum: Maximum:
20.0 1000.0
4 Firmware Drive Functions
4.13 Monitoring functions
Related to:
HLA
Data type:
UNS.WORD
Related to:
HLA
Data type:
UNS.WORD
Related to:
HLA
Data type:
FLOAT
µ
m = 100 kHz
Related to:
HLA
Data type:
FLOAT
Cross reference: -
Protection level:
3/3
Active:
Immediately
Cross reference: -
Protection level:
3/3
Active:
Immediately
Cross reference: -
Protection level:
3/3
Active:
Immediately
Cross reference: -
Protection level:
3/3
Active:
Immediately
4-153