Sensor Harness Cable (Cab000145) - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

Sensor Harness Cable (CAB000145)

Sensor Harness Cable (C
Sensor Harness Cable (C Sensor Harness Cable (C
The Sensor Harness Cable is made up of three separate inner-core cables; A A A A Trigger (7 wires); B B B B Alarm & LED (4 wires); C C C C
Speed (3 wires)
A. Trigger Sensor Harness. A. Trigger Sensor Harness.
A. Trigger Sensor Harness. A. Trigger Sensor Harness.
1. Red. Connect to accessory 12V+ . Provides ignition to Digital Video
Recorder. DO Not connect to noise suppression circuit, connect to true
Ignition source.
2. Yellow. Connect to Stop Arm (8 way) circuit 12V+
3. Blue. User customizable sensor (optional) 12V+
4. Green. User customizable sensor (optional) 12V+
5. Orange. Connect to Brake light circuit 12V+.
6. Brown. User customizable sensor (optional) 12V+
7. White. Connect to Warning light (Amber) circuit, 12V+.
B. B. B. B. Alarm & LED Alarm & LED Harness Alarm & LED Alarm & LED Harness (4 wires): Harness Harness
1. Red. 12V+ output from unit. Connect to Red wires from Alarm Button and Record LED. Do Not
signal.
2. Green. Connect to White wire from Record LED.
3. Black. Connect to Black wire from Alarm button.
4. White. (Optional), connect to 12V Driver Alarm Buzzer or Light Accessory
C. Speed C. Speed C. Speed C. Speed Sensor Harness Sensor Harness (3 wires), Not required with GPS. Sensor Harness Sensor Harness
1. Green. Connect to Speed Pulse. (See transmission or ABS electrical manual for your vehicle.
2. Red. Output from Digital Video Recorder, (Only to be used with Speedometer Interface Modules)
3. Black. Ground Signal ( - ) from Digital Video Recorder. (Only to be used with Speedometer Interface Modules)
AB000145)
AB000145) AB000145)
-57-
Do Not hook-up to 12V Input
Do Not Do Not