Saving Configuration; Loading Configuration On Recorder; Check For Updates - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

Saving Configuration.

Saving Configuration. Saving Configuration. Saving Configuration.
Save the new configuration file on to the comrad™ in the Config folder. In this case, the file will be saved as "4063D4FBBF".

Loading Configuration on Recorder.

Loading Configuration on Recorder.
Loading Configuration on Recorder. Loading Configuration on Recorder.
After you have saved the configuration you must load it if you wish the ID to become active.
Power up the recorder and Go to Configuration, press Go.
Go to Basic and press Go.
Next choose Load ID and press Go.
Use the + and – signs to scroll to the desired configuration file.
Finally press the blue menu button to load.
All files recorded from this point forward will use this configuration.

Check for Updates..

Check for Updates..
Check for Updates.. Check for Updates..
New software updates can be downloaded automatically MAXVIEW™. All software updates are cumulative. The most
recent software update for the recorder will incorporate any changes introduced by previous versions.
Make sure that the computer has an internet
connection.
Do not start MAXVIEW™ manually (Using Desktop
Icon).
Plug the comrad™ into your computer through the
USB port. See comrad™ only to Computer section
for more details. MAXVIEW™ will automatically Open
and start running.
Choose File... Check for Updates.
Press OK to download updates to the comrad™.
-52-