System Shutdown; Downloading Video - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

When using the Dual Head USB Cable, ensure that the main head (the one with two wires coming out of it) is
plugged into the system.
Or shut the NiTRO™ 900 down and remove the comrad™ to connect it to a PC for downloading video. Refer to
Downloading Video section for full details.
S S S S ystem Shutdown ystem Shutdown. . . .
ystem Shutdown ystem Shutdown
By default, the NiTRO™ 900 is designed to automatically shutdown once the ignition has been turned off and after the
Record Extend time has expired. This only occurs if the Record Extend timer is not cancelled
To cancel Record Extend, press Cancel when the unit is counting down.
If you have stopped the system from Recording and need to manually shut the system down, follow the directions below.
In order to safely shut down the system, you need to use the shutdown menu.
ENTRY ENTRY: Press 'Go' to enter the Shutdown menu. ENTRY ENTRY
Press Ok to shutdown or Cancel to return to
Shutdown menu.
MESSAGES: "Shutting down..." appears when MESSAGES
MESSAGES MESSAGES
the system is safely shutting down. The system
takes roughly 15 seconds to fully power down.
Ensure that the ignition is not turned on, or the
system may start up again after 5 seconds.
Do not remove the comrad™ from the NiTRO™ 900 recorder until the system has
fully powered down.

Downloading Video

Downloading Video. . . . Downloading Video Downloading Video
There are several ways to download and view video files from the recorder to your PC. Video can be viewed using
MAXVIEW™. The installation for MAXVIEW™ is located on the comrad™, refer to MAXVIEW™ section for instructions.
c c c c omrad omrad omrad omrad™ Only to C ™ Only to Computer ™ Only to C ™ Only to C omputer (Recommended) omputer omputer
Please use both USB Connectors in order get sufficient power to the NiTRO™ comrad™. If there aren't two USB
ports available on the PC, use the comrad Power Supply.
This only occurs if the Record Extend timer is not cancelled. This only occurs if the Record Extend timer is not cancelled This only occurs if the Record Extend timer is not cancelled
EXIT: Press blue menu button or Cancel to exit the Shutdown menu. EXIT EXIT EXIT
(Recommended). . . . (Recommended) (Recommended)
You will need:
-36-
comrad™
Dual Head USB Cable
comrad™ Power Supply (optional)
PC with two USB ports