Troubleshooting - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

Troubleshooting. . . .

Troubleshooting
Troubleshooting Troubleshooting
When I turn on the Bus, my recorder won't power up or my recorder powers up and then shuts down every couple of When I turn on the Bus, my recorder won't power up or my recorder powers up and then shuts down every
When I turn on the Bus, my recorder won't power up or my recorder powers up and then shuts down every When I turn on the Bus, my recorder won't power up or my recorder powers up and then shuts down every
minutes. Why is this? minutes. Why is this?
minutes. Why is this? minutes. Why is this?
Ensure that the Sensor harness is connected correctly
Ensure the black Molex is connected to the back of the recorder
Ensure comrad™ is properly inserted into the NiTRO™ Control unit
My camera shows an upside down image: My camera shows an upside down image:
My camera shows My camera shows an upside down image: an upside down image:
The camera is meant to be mounted to the ceiling. If the camera is mounted right side up, or sideways, the preview
will show an image that is rotated.
Rotate the lens by removing the two large screws on the camera bracket, rotating the camera bracket 180° and
then screwing it back on.
When I view vi When I view vi When I view vi When I view video, there is only a black deo, there is only a black deo, there is only a black screen: deo, there is only a black
Make sure all camera harnesses are connected to the video in ports on the back of the recorder and/or camera.
I have connected a monitor to my recorder, yet there is nothin I have connected a monitor to my recorder, yet there is nothin I have connected a monitor to my recorder, yet there is nothin I have connected a monitor to my recorder, yet there is nothing on the screen of the monitor. Why?
If the monitor uses an S-video connector, the monitor needs to be connected to the unit prior to starting the unit.
I have I have MAXVIEW MAXVIEW™ ™ ™ ™ open and want to view a video file. How do I do this? open and want to view a video file. How do I do this?
I have I have MAXVIEW MAXVIEW open and want to view a video file. How do I do this? open and want to view a video file. How do I do this?
Click on File > Open.
Using the drop down menu under "Look in", locate NiTRO Videos.
Double click on 'videos' folder (Select 'clips' folder if applicable).
Select desired video file(s) to view by clicking with mouse to highlight and then press Open.
If you rename the video file make sure you put the right extension at the end of the file (.avi)
screen: screen: screen:
g on the screen of the monitor. Why? g on the screen of the monitor. Why? g on the screen of the monitor. Why?
-55-
couple of
couple of couple of
(.avi); Example: my clip (.avi) (.avi) ; Example: my clip.avi ; Example: my clip ; Example: my clip .avi .avi .avi