Browsing The Recorder On A Computer; Recorder To Local Area Network (Lan); Figure 25: Browsing The Recorder On A Computer - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

Connect the USB Adaptor to the USB
During the detection process there should be three audible beeps.
The Local Area Connection is now active.

Browsing the Recorder on a Computer

Browsing the Recorder on a Computer. . . .
Browsing the Recorder on a Computer Browsing the Recorder on a Computer
Once the recorder is connected to the laptop or desktop, open Windows Explorer by right clicking with your mouse on the
START menu and selecting Explore.
In the address bar type \\ followed by the IP Address 192.168.1.1 and press Enter. To view the IP address go to
Configuration >> System >> IP1
1. Address Bar
2. setup.exe
Figure 25 Figure 25: : : : Browsing The Recorder On A Computer. Browsing The Recorder On A Computer.
Figure Figure 25 25 Browsing The Recorder On A Computer. Browsing The Recorder On A Computer.
Once Windows Explorer finds the IP address, double click on the NiTRO™ folder.
MAXVIEW™ will not auto start when connecting to the NiTRO™ unit through network share.
For first time connection, you will need to install MAXVIEW™ software by double clicking on the setup.exe file.
Refer to MAXVIEW™ Installation section for details on installing the viewer.

Recorder to Local Area Network (LAN)

Recorder to Local Area N
Recorder to Local Area N Recorder to Local Area N
Connect the Cat5 Ethernet Cable to the Ethernet port on the back of the
recorder
Connect the other end of the Ethernet cable to the office Local Area
Connection (LAN).
CAT 5 Crossover Cable
etwork (LAN). . . .
etwork (LAN) etwork (LAN)
USB to Ethernet Adaptor
USB USB- - - - A A A A port on the front of the recorder. USB
-39-