Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual page 30

Allows the user to reset current settings to defaults, erase all settings, or erase all video.
RESET
The system clone feature allows the user to recover a hard drive in case of disk corruption.
CLONE
DISK USED
PURPOSE: The Disk Used menu displays the percentage of storage space used up on the disk. PURPOSE: PURPOSE: PURPOSE:
ENTRY ENTRY: No entry, data already displayed on ENTRY ENTRY
screen.
SERIAL
PURPOSE: The Serial menu displays the unique serial number of the recorder. This serial number is also the default ID that PURPOSE:
PURPOSE: PURPOSE:
is displayed under Set ID.
ENTR ENTRY Y Y Y : No entry, data already displayed on
ENTR ENTR
screen.
IP0
PURP PURP PURPOSE: PURP OSE: When the recorder is connected to a LAN or a Laptop via the rear Ethernet port, the IP address will be OSE: OSE:
displayed under IP0. This address is used to connect to the recorder over the network.
ENTRY: No entry, data already displayed on ENTRY ENTRY ENTRY
screen. An IP address is only displayed if the
recorder is attached to a LAN or PC connection.
OTHER OTHER OTHER: Refer to IP0 when trying to browse the OTHER
recorder on a Local Area Network (LAN)
A DHCP Server is required on the Local Area Network for the NiTRO™ unit to obtain an IP automatically through
the rear Ethernet port.
IP1
PURPOSE: PURPOSE: When the recorder is connected to a laptop via the front USB port using the USB to Ethernet adaptor, the IP
PURPOSE: PURPOSE:
address 192.168.1.1 will be displayed under IP1. This address is used to connect to the recorder from that laptop.
ENTRY ENTRY ENTRY ENTRY: No entry, data already displayed on
screen. An IP address is only displayed if the
recorder is attached to a USB to Ethernet
adaptor.
EXIT: Use the right arrow to advance to the next menu or left arrow to EXIT EXIT EXIT
advance to the previous menu. Press the blue button to return to the
System sub menu.
EXIT: Use the right arrow to advance to the next menu or left arrow to EXIT
EXIT EXIT
advance to the previous menu. Press the blue button to return to the
System sub menu.
EXIT EXIT: Use the right arrow to advance to the next menu or left arrow to EXIT EXIT
advance to the previous menu. Press the blue button to return to the
System sub menu.
EXIT EXIT: Use the right arrow to advance to the next menu or left arrow to EXIT EXIT
advance to the previous menu. Press the blue button to return to the
System sub menu.
-30-
DEFAULT CONDITION: 1% DEFAULT CONDITION
DEFAULT CONDITION DEFAULT CONDITION
DEFAULT CONDITION: The serial number DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION
DEFAULT CONDITION: Blank DEFAULT CONDITION
DEFAULT CONDITION DEFAULT CONDITION