Figure 26 Recorder To Local Area Network - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

LED lights adjacent to the Ethernet connector will light yellow or green indicating proper cabling.
During the detection process there should be a few audible beeps.
The Local Area Connection is now active
On the front LCD panel of the recorder scroll to Configuration >> System >>IP0
should be displayed, e.g. 192.168.0.1 e.g. 192.168.0.172
e.g. 192.168.0.1 e.g. 192.168.0.1
e.g. \\192.168.0.1
Windows Explorer (e.g. e.g. e.g.
1. 1. 1. 1. Address Address Address Address
2. 2. 2. 2. setup.exe setup.exe
setup.exe setup.exe
Figure Figure 26 26: : : : Recorder To Local Area Network. Recorder To Local Area Network.
Figure Figure 26 26 Recorder To Local Area Network. Recorder To Local Area Network.
The \\ backslashes are important. There is no "http://", as this is not a web service, but a network share.
MAXVIEW™ will not auto start when connecting to the NiTRO™ unit through network share.
Configuration >> System >>IP0 to locate the IP address. The IP Address
Configuration >> System >>IP0 Configuration >> System >>IP0
72 Simply enter two backslashes followed by that address into the address bar in
72 72
192.168.0.172 192.168.0.1 192.168.0.1 72 ). 72 72
-40-