Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual page 22

ENTRY: Press 'Go' to enter Lens Setup menu, ENTRY
ENTRY ENTRY
the screen now displays "Preview" and the
current time and date toggle back and forth.
Live video will appear on the TV/Monitor.
MESSAGES: If the "No signal" menu appears MESSAGES
MESSAGES MESSAGES
instead of the date/time, or a blue screen is
shown, this indicates that either there is no
camera connected, no signal coming from the
camera, or that there is a problem with the
video input on the video card.
SET ID
PURPOSE: PURPOSE: Set ID allows for a unique identifier for each video or each video project. Each setting in the configuration menu PURPOSE: PURPOSE:
will be saved under the ID. This unique name will be displayed in the subtitles, in the video file list and in the video file name.
All video saved to the hard drive is saved by this ID name.
ENTRY: Press 'Go' to enter the Set ID menu, the ENTRY ENTRY ENTRY
current ID is displayed. The blinking number or
letter indicates which letter or number is active
to be changed. Use the left and right arrow
keys to move through the row and use the plus
and minus keys to scroll up or down through the
alphanumeric list. The ID can be set using
UPPERCASE, lowercase
numbers 0 through 9, space and dash, with a
maximum of 20 characters.
OTHER: The default ID will only be displayed if the OTHER
OTHER OTHER
ID has never been set, if a Reset Config or Reset
ALL has been performed or if the ID has never
been changed from default.
LOAD ID
PURPOSE: The Load ID menu allows you to select any ID that you have previously saved on the hard drive. Each time you PURPOSE: PURPOSE: PURPOSE:
make an ID, it is saved to the Config folder on the comrad™. Using the Load ID function allows you to select between any
ID you have saved by using the plus and minus keys to scroll through the list.
ENTRY: Press 'Go' to enter the Load ID menu, ENTRY ENTRY ENTRY
the current ID will be flashing onscreen. Use
the plus or minus signs to scroll to another ID.
Pressing the blue menu button will load the new
ID you have selected.
OTHER: Remember that only one ID can be OTHER
OTHER OTHER
saved in the Control unit at one time, but all ID's
are saved on the comrad™. Therefore, if you
change comrad™'s, the last ID loaded or
activated will still be active when you install a
completely different drive. You will also be able
to load in any one of the ID's from the new
comrad™.
EXIT: Press the blue menu button to exit and return to Lens Setup, the EXIT
EXIT EXIT
video picture will no longer appear on the splash screen.
EXIT: Press the blue menu button to exit Set ID. EXIT EXIT EXIT
alphabet letters,
EXIT: Press the blue menu button to exit Load ID. EXIT EXIT EXIT
-22-
DEFAULT CONDITION: N/A DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION
DEFAULT CONDITION: Factory Serial Number DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION
DEFAULT CONDITION: Current ID DEFAULT CONDITION DEFAULT CONDITION DEFAULT CONDITION