Comrad™ Only To Computer; Figure 22: Comrad™ Removal; Figure 23: Comrad™ To Pc Via Usb - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

Connecting the Recorder to a Computer. . . . Connecting the Recorder to a Computer
Connecting the Recorder to a Computer Connecting the Recorder to a Computer
The NiTRO™ unit acts as a DHCP Server through the USB Ethernet. A DHCP Client on the Laptop/PC is required
for the Laptop/PC to obtain an IP automatically.
Recorder to Local Area Network (LAN) Recorder to Local Area Network (LAN)
Recorder to Local Area Network (LAN) Recorder to Local Area Network (LAN)
A DHCP Server is required on the Local Area Network for the NiTRO™ unit to obtain an IP automatically through
the rear Ethernet port.
comrad™ Only to Computer comrad comrad comrad ™ Only to Computer ™ Only to Computer ™ Only to Computer. . . .
Figure Figure Figure 22 Figure 22 22: : : : comrad 22 comrad™ ™ ™ ™ Removal comrad comrad Removal. . . . Removal Removal
Figure Figure Figure 23 Figure 23 23: : : : comrad 23 comrad comrad™ to PC via USB comrad ™ to PC via USB. . . . ™ to PC via USB ™ to PC via USB
If the Dual Head USB Cable does not provide enough power for the comrad, also insert the DC plug from the
comrad™ Power Supply to the DC Jack (VDC-IN) on the back of the comrad™. Plug the other end of the
power supply to a wall outlet.
If the comrad™ is connected to a PC for the first time, it will initiate MAXVIEW™ Installation. Subsequent connections will
automatically open MAXVIEW™. Refer to MAXVIEW™ section for details.
You will need: You will need:
You will need: You will need:
.
You will need: You will need: You will need: You will need:
Power down the recorder and remove the comrad™ unit by pulling
firmly on the front.
Insert both heads of the Dual Head USB Cable into the USB ports on
your computer. Connect the mini end of the USB cable into the USB
port on the back of the comrad™.
-37-
NiTRO™ 900 Recorder
USB–Ethernet Adaptor
Crossover Cable
PC with Ethernet port
NiTRO™ 900 Recorder
Ethernet Cable
LAN connection port