Stop Recording; Playback From Recorder; Playback Methods; Figure 19: Record Screen - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

LCD Screen flashes between LCD Screen flashes between
LCD Screen flashes between LCD Screen flashes between
ID and Record Mode ID and Record Mode ID and Record Mode ID and Record Mode
LCD screen flashes between LCD screen flashes between LCD screen flashes between LCD screen flashes between
current time and current current time and current date. current time and current current time and current
Figure Figure 19 19: Record Screen : Record Screen. . . .
Figure Figure 19 19 : Record Screen : Record Screen

Stop Recording

Stop Recording. . . . Stop Recording Stop Recording
If you want to stop recording, press the blue menu button, and then press the STOP button. The STOP button is shown only
when the recorder is recording.

Playback from Recorder. . . .

Playback from Recorder
Playback from Recorder Playback from Recorder
The playback menu provides a means for the user to display the video for playback on the recorder through any video
output port.
Within the playback menus one can Mark & Save video and Mark & Save up to 10 minutes of video.
Connect a monitor to the video output port to view video. Refer to Search, Date/Time, Alarms, and Clips for full
descriptions of navigation through the functions of the playback menus.

Playback Methods. . . .

Playback Methods Playback Methods Playback Methods
The Playback menu offers 4 types of Search methods to play back video files.
Method I: Search
Method II: Date/Time
Method III: Alarm
Method IV: Clip
date. date. date.
Search videos in chronological order. All videos are indexed by a first-in, first-out method.
When entering this menu, the index will indicate current video file out of total video files and the
monitor will show the corresponding video to match.
Example: If there are 10 video files, the index will show 1>10, 2>10...10>10.
Input the date and time of the video file you want to watch. Playback skips to the video that is
closest to that time. All videos are indexed by a first-in, first-out method.
If the system is configured using "Driver Alarm", in this section all video will be indexed by the
driver alarm. When entering this menu, the index will indicate current alarm out of total
alarms and the monitor will show the corresponding video to match.
Example: If the driver alarm has triggered 10 times, the index will show 1>10, 2>10...10>10.
Any clips that have been saved from the Search, Date/Time or Alarms sections will be saved
into Clips and can be viewed from this menu. When entering this menu, the index will indicate
Time elapsed since Time elapsed since
Time elapsed since Time elapsed since
recording started recording started
recording started recording started
Displays active Displays active Displays active Displays active
Sensors Sensors Sensors Sensors
-33-