Setting The Recorder Configuration; Figure 35: Save A Still Image - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

Figure 35 Figure Figure Figure 35 35: Save A Still Image. 35 : Save A Still Image. : Save A Still Image. : Save A Still Image.

Setting the Recorder Configuration.

Setting the Recorder Configuration.
Setting the Recorder Configuration. Setting the Recorder Configuration.
You can set up the recorder configuration using MAXVIEW™ rather than the LCD screen. To open the configuration menu
first Double-click on the file located in the configuration list.
The filename is the ID name and by default is the factory serial number. Each ID that has
been set will be listed in the Configuration list.
For details on any of the configuration settings, refer to Setting the Configuration section starting on page 27.
General Configuration.
In this screen you set the following configurations:
ID
Startup Mode
Time Zone
Units
Pulses Per Unit
Volume Out
-49-