Audio Controls; Displaying Sensors; Figure 32: Adjusting Playback Speed; Figure 33: Adjusting Sound Balance In Windows Xp - Gatekeeper Systems Digital Smart Recorder NiTRO 900 Manual

1. Slider Bar, drag with mouse to move backwards and forwards.
2. Speaker, use to mute sound. There may be a slight delay before sound is actually muted.
3. Adjust Playback Speed, (you will only hear audio when slider is set to 1).
Figure 32 Figure Figure Figure 32 32: Adjusting Playback Speed. 32 : Adjusting Playback Speed. : Adjusting Playback Speed. : Adjusting Playback Speed.
Audio Cont Audio Cont

Audio Controls.

Audio Cont rols. rols. rols.
You can turn Audio on/off by clicking the Speaker Icon, (1), located in the Video Control
Panel. There may be a slight time delay of 2-3 seconds before audio is muted or
audible.
Using the Balance control in Windows Volume Control, located in "Start Menu > Programs > Accessories > Entertainment >
Volume Control", you can control how loud each audio channel is. This is useful if, for example, the sound from one camera
is so loud that the sound from the other camera can't be heard.
Figure 33 Figure 33: Adjusting Sound Balance In Windows XP : Adjusting Sound Balance In Windows XP. . . .
Figure Figure 33 33 : Adjusting Sound Balance In Windows XP : Adjusting Sound Balance In Windows XP

Displaying Sensors.

Displaying Sensors.
Displaying Sensors. Displaying Sensors.
You can choose to have sensors appear in the Video Clip Graph at the time they were triggered.
1. Choose Edit.
2. Choose Options.
3. Place a check in the box for each trigger you want to appear on the Video Clip Graph.
4. Press Apply.
5.
Press Ok.
1. Click on any Sensor to move to that point in the video
2. Click on any Sensor to move to that point in the video.
-47-