Status Display Warning; Warnings Control Module Delta - ProMinent delta Operating Instructions Manual

Troubleshooting
8.3

Status display Warning

Photo Warning
Control module
!
checkout time,
Limit
!
Calibration
!
8.4

Warnings control module delta

Warning
Communication
Software / data
Controllers
44
The display flashes. An explanation of the warning is displayed on
the bottom line. In this state, the control module delta
tional.
Description
A warning from the control module delta
Error with the feedforward control (control module delta
n
operates)
Overflow of the control module output value (control module
n
delta ® still operates)
The control module is located in basic load control
n
A warning from the control module delta
Checkout time has elapsed (control module delta
n
basic load)
The limit value has been exceeded / undershot
The control module delta
n
A calibration error has been detected
When an error has been detected then the calibration data will not
be accepted. Operation is continued with the old data. This affects
the calibration for the current interface and the sensors. If a
warning is displayed during a sensor calibration, this could indicate
a sensor error.
®
Description
A continuous communication error has been determined
Configuration values are inconsistent
n
Communication error (unknown reply, wrong checksum)
n
Limit value undershot / exceeded
n
Checkout time elapsed
n
® has been detected
® has been detected
®
® is located in basic load control
® is still func‐
® still
still with