Commissioning; Initial Commissioning; Selecting The Operating Language; Selection Of The Measured Variable And Measuring Range - ProMinent delta Operating Instructions Manual

5

Commissioning

5.1

Initial Commissioning

5.1.1

Selecting the operating language

5.1.2

Selection of the Measured Variable and Measuring Range

WARNING!
Run-in time of sensors
This can result is hazardous incorrect metering
Take into consideration run-in times when commis‐
sioning
– Correct measuring and metering is only possible if
the sensor is working perfectly
– It is imperative that the run-in times of the sensors
are adhered to
– The run-in times should be allowed for when plan‐
ning initial operation
– It may take a whole working day to run-in the
sensor
– Please read the operating manual for the sensor
The control module delta
control module delta ® connected to the delta
pump.
Setting the operating language is carried out via the setting menu
of the connected delta ® solenoid metering pump.
WARNING!
Incorrect metering due to incorrect metering range
Possible consequence: Fatal or serious injuries
– The measuring range of the sensor is essential for
the measuring range!
– If the assignment of the measuring range is modi‐
fied, the settings must be checked in all menus
– If the assignment of the measuring range is
changed, the sensor must be recalibrated
Commissioning
has the same language settings as the
®
® solenoid metering
21