Key Functions; Continuous Display Extended Control Module Delta - ProMinent delta Operating Instructions Manual

Operating Schematics / Display Symbols
6.1.1

Key functions

Key
STOP / START key
STOP
START
P key
i key
i
Arrow keys UP or DOWN individually pressed (until
6.2

Continuous display extended control module delta

24
Operation
briefly pressed
(0.2 - 1 s)
briefly pressed
(0.2 - 1 s)
2 s pressed
3 s pressed
briefly pressed
(0.2 - 1 s)
long pressed
(> 1 s)
double arrows appear)
simultaneously pressed
In the main display, in addition to the display of the delta
metering pump, the display for the control module delta
be added.
The control module delta
and actual values of the control module delta
I. Setpoint (of the control module delta
n
(12 x 24 points), in the selected unit (ppm, pH or mV)
II. Actual value
n
very large figure (12 x 24 points), in the selected unit (ppm, pH
or mV)
III. Existing continuous display on the
n
delta ® solenoid metering pump
Format for the main display (S = Setpoint):
Chlorine: (S) XXX.YY ppm
n
pH: (S) XX.YY pH
n
Redox:(S) XXX mV
n
Display: Only measured value = actual value
Display: Measured value with an
In continuous displays
(Operation)
stop pump
start pump
start batch (only in oper‐
ating mode "Batch")
go to setting mode
----
toggle between the
continuous displays
go to the second level of
the continuous display
change directly adjust‐
able variables
suction (in continuous
display "stroke
frequency")
®
display has all the values for the setpoint
®
[i] (input value of the control module delta
„S" in front of it = Setpoint
In setting mode
(Settings)
stop pump
start pump
Confirm entry - Jump to
next menu option or in
the continuous display
----
Return [ESCAPE] to the
continuous display
----
----
select another setting.
change individual figure
or number.
at the upper end of a
selection, effect similar to
the ESC key
----
® solenoid
can also
®
® .
® ) in a very large figure
® ) in a