Santak CASTLE Series User Manual page 7

B. Use only tools with insulated grips and handles.
C. Wear rubber gloves and boots.
D. Do not lay tools or metal parts on top of batteries.
E. Disconnect the charging source prior to connecting or
disconnecting battery terminals.
4. Do not attempt to dispose of batteries by burning them. It could
cause explosion.
5. Do not open or destroy batteries. Effluent electrolyte can cause injury
to the skin and eyes. It may be toxic. If cause injury by Effluent
electrolyte, use cool water for washing and go to hospital ask for help
immediately.
6. Do not short the battery with metal objects, It could cause an electric
shock, fire or explosion.
Maintenance
1. The operation environment and store environment will impact on the
service lifetime and reliability of UPS.
Do not install or store the UPS in the places where are listed below.
A. Do not install UPS in place where the ambient temperature
lower than 0℃ or higher than 40℃.
B. Do not install/store UPS in place where the relative humidity
lower than 20% or higher than 90%.
C. Do not install/store UPS in place where there is flammable or
corrosive gas, place with large amounts of conductive dust,
place exposed to shock or vibration, or outdoor.
2. If you would store the UPS for a long period, the storing area
temperature should be the range of -25°C to 55°C, and before turning
on UPS, it is highly suggested to put UPS in the ambient temperature
above 0°C and last at least 2 hours.
- 5 -