Santak CASTLE Series User Manual page 5

Safety Instructions
Please read carefully the following user manual and
the safety instructions before installing or operating
the unit!
Operation Safety
1. Please read all instructions before operating the equipment and
connecting to mains power, save this manual for future reference.
2. Please pay attention to all the warning indication, understand and
follow all the instruction.
3. Do not install the UPS where it would be exposed to direct sunlight ,
Rain or damp environment.
4. Do not install the UPS near to heating equipment or heating source
and heating environment.
5. Do not block ventilation openings on the UPS's housing. Ensure the
air vents on the front, side and rear of the UPS are not blocked.
Recommended at least 50cm of space on each side.
6. Use dry cloth for cleaning.
7. Use dry-chemical fire extinguisher when UPS present fire danger, do
not use fluid-fire extinguisher, fluid- fire extinguisher will cause
hazards shock.
8. In order to reduce the interference of UPS, the output line length of
UPS should be within 10 meters.
9. For pluggable devices, sockets shall be installed near the
equipment and shall be accessible.
- 3 -