Comestero Suzohapp Multi PRO Operating Manual page 74

10.4.2.1.1 Correct car position
Touching the "> Next" button in the screen shown in Figure 82 will display the screen shown
in Figure 84 below.
If the control of the proper vehicle position before the washing cycle begins is going to be
performed by a presence detector connected to Multi PRO (see paragraph 10.4.1.9.1), this
screen is not displayed.
Should that not be the case, touch the "Yes!" button to have the user confirm that his vehicle
is in the right position before proceeding
10.4.2.2 Buy tokens/coins
Touching the "Buy tokens/coins" button reproduced on the
right in the screen shown in Figure 81 will display a screen
similar to the one shown in Figure 85 below (whose content
will vary according to the hoppers installed on the
machine), allowing to set the coin and token dispensing
parameters.
Figure 84
Figure 85
74
EN