Introduction; Description Of Components - Sullair TS-32S Operator's Manual And Parts List

2.1 INTRODUCTION

Refer to Figures 2-1A
lubricated rotary screw air compressor provides you
with a unique experience in improved reliability and
greatly reduced maintenance.
Compared to other types of compressors, the
Sullair rotary screw is unique in its mechanical reli-
ability and lack of "wear". The compressor requires
absolutely no inspection of its internal parts.
By reading through Section 6, you will notice the
easy process of caring and maintaining this Sullair
manufactured product. Should any questions arise
which cannot be answered in this text, call your
nearest Sullair representative or the Sullair
Corporation Service Department.

2.2 DESCRIPTION OF COMPONENTS

Refer to Figures 2-1A
and assemblies of the air compressors are clearly
shown. The complete package includes compres-
Figure 2-1A Sullair Series TS-32S Rotary Screw Compressor (Air-cooled Typical)
and 2-1B. Your new Sullair
and 2-1B. The components
DESCRIPTION
sor, electric motor, compressor inlet system,
compressor discharge system, compressor
cooling and lubrication system, capacity con-
trol system and Supervisor Controller
processor system and starter all mounted on a
structural steel frame
On air-cooled models, a fan draws air over the fan
motor and forces it through the combined 400HP
aftercooler (oil cooler alone: 500-600HP) and fluid
cooler, thereby removing the heat of compression
from the cooling fluid.
On water-cooled models, fluid is piped into a water-
cooled heat exchanger where the heat of compres-
sion is removed from the fluid. A fan is used to sup-
ply sufficient ventilating air to compressors
equipped with an optional enclosure.
Both air-cooled and water-cooled versions have
easily accessible items such as the fluid filters and
control valves. The inlet air filters are also mounted
Section 2
TM , micro-
5