Sullair TS-32S Operator's Manual And Parts List
Sullair TS-32S Operator's Manual And Parts List

Sullair TS-32S Operator's Manual And Parts List

Industrial rotary screw air compressor 400-600hp/298-447kw air-cooled & water-cooled standard and 24kt
Table of Contents

Advertisement

INDUSTRIAL ROTARY SCREW
AIR COMPRESSOR
TS-3 3 2S
AIR-COOLED & WATER-COOLED
STANDARD AND 24KT
400-600HP/
298-447KW
OPERATOR'S
MANUAL AND
PARTS LIST
KEEP FOR
FUTURE
REFERENCE
Part Number 02250138-002
©Sullair Corporation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TS-32S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sullair TS-32S

  • Page 1 INDUSTRIAL ROTARY SCREW AIR COMPRESSOR TS-3 3 2S 400-600HP/ 298-447KW AIR-COOLED & WATER-COOLED STANDARD AND 24KT OPERATOR’S MANUAL AND PARTS LIST KEEP FOR FUTURE REFERENCE Part Number 02250138-002 ©Sullair Corporation...
  • Page 2 Sullair Air Care Seminars are 3-day courses that provide hands-on instruction in the proper operation, mainte- nance and service of Sullair equipment. Individual seminars on Industrial compressors and compressor electrical systems are presented at regular intervals throughout the year at a dedicated training facility at Sullair’s corporate headquarters in Michigan City, Indiana.
  • Page 3: Table Of Contents

    3.2 LUBRICATION GUIDE- STANDARD COMPRESSORS 3.3 LUBRICATION GUIDE- 24KT COMPRESSORS 3.4 APPLICATION GUIDE 3.5 LUBRICATION CHANGE RECOMMENDATIONS AND MAINTENANCE Figure 3-2A Identification- TS-32S 400HP/ 298KW (Typical) Figure 3-2B Identification- TS-32S 500-600HP/ 373-447KW (Typical) Figure 3-3A Piping and Instrumentation- Air-cooled 400HP/ 298KW (Typical)
  • Page 4 TABLE OF CONTENTS Section 3 Page SPECIFICATIONS Figure 3-3C Piping and Instrumentation- Water-cooled (CONTINUED) 400-600HP/ 298-447KW (Typical) Section 4 INSTALLATION 4.1 MOUNTING OF COMPRESSOR 4.2 VENTILATION AND COOLING 4.3 SERVICE AIR PIPING 4.4 COUPLING ALIGNMENT CHECK 4.5 FLUID LEVEL CHECK 4.6 FLUID PIPING (REMOTE AIR-COOLED OPTION ONLY) 4.7 ELECTRICAL PREPARATION 4.8 MOTOR ROTATION DIRECTION CHECK...
  • Page 5 TABLE OF CONTENTS Section 7 Page MAINTENANCE (CONTINUED) 7.8 TROUBLESHOOTING 7.9 TROUBLESHOOTING GUIDE Section 8 ILLUSTRATION AND PARTS LIST 8.1 PROCEDURE FOR ORDERING PARTS 8.2 RECOMMENDED SPARE PARTS LIST- 400, 500 AND 600HP/ 298, 373 AND 447KW 8.3 MOTOR, COMPRESSOR, FRAME AND PARTS- GEAR DRIVE 8.4 MOTOR, COMPRESSOR, FRAME AND PARTS- DIRECT DRIVE...
  • Page 6 TABLE OF CONTENTS Section 8 Page ILLUSTRATION AND PARTS LIST 8.24A MOISTURE DRAIN- 400HP/ 298KW (02250137-280) (CONTINUED) 8.23B MOISTURE DRAIN 500-600HP/ 373-447KW (02250137-344) 8.24 PNEUMATIC CONTROLS 8.25 CONTROL BOX- SOLID STATE (TYPICAL) 8.26 CONTROL BOX- FULL VOLTAGE (TYPICAL) 8.27 CONTROL BOX- WYE-DELTA (TYPICAL) 8.28 INSULATION- AIR-COOLED 400-600HP/ 298-447KW 8.29 INSULATION- WATER-COOLED AND REMOTE- COOLED 400-600HP/ 298-447KW...
  • Page 7: General

    SAFETY 1.1 GENERAL the service air outlet and the shut-off (throttle) Sullair Corporation and its subsidiaries design and valve, either at the compressor or at any other point manufacture all of their products so they can be along the air line, when an air hose exceeding 1/2”...
  • Page 8: Fire And Explosion

    Section 1 SAFETY or at a minimum of at least weekly to make sure it al that may be damaged by heat or that may sup- is not blocked, clogged, obstructed or otherwise port combustion and is in close proximity, prior to disabled.
  • Page 9: Toxic And Irritating Substances

    Section 1 SAFETY small cuts and burns as they may lead to infection. tained in full compliance with all applicable Federal, State and Local codes, standards and regulations, 1.7 TOXIC AND IRRITATING SUBSTANCES including those of the National Electrical Code, and A.
  • Page 10: Entrapment

    Section 1 SAFETY or swinging of the compressor once it has been lift- mum practical speeds. ed clear of the ground. N. Make sure pallet-mounted compressors are firm- F. DO NOT attempt to lift in high winds. ly bolted or otherwise secured to the pallet prior to attempting to forklift or transport them.
  • Page 11: Introduction

    The complete package includes compres- control valves. The inlet air filters are also mounted Figure 2-1A Sullair Series TS-32S Rotary Screw Compressor (Air-cooled Typical)
  • Page 12: Sullair Compressor Unit, Functional Description

    Section 2 DESCRIPTION Figure 2-1B Sullair Series TS-32S Rotary Screw Compressor (Water-cooled Typical) for easy access and servicing. from the air. At this time, the air flows to the serv- ice line and the fluid is cooled in preparation for re- 2.3 SULLAIR COMPRESSOR UNIT, FUNCTIONAL...
  • Page 13 Section 2 DESCRIPTION Figure 2-2 Compressor Piping and Instrument Diagram (400, 500, 600HP/ 298, 373, 447KW)
  • Page 14: Compressor Discharge System, Functional Description

    All Sullair compressor models are equipped with 2.5 COMPRESSOR DISCHARGE SYSTEM, FUNC- high pressure shutdown protection to shut down the TIONAL DESCRIPTION compressor at 30 psi above rated pressure.
  • Page 15 4 distinct phases of compressor operation. The used. As air demand keeps dropping further, the following applies to TS-32S Series compressors spiral valve keeps opening more and more until all ranging from 400 through 600hp (298-447kw). For the bypass ports are fully open.
  • Page 16 Section 2 DESCRIPTION Figure 2-3A Compressor Cooling and Lubrication System- Air-cooled...
  • Page 17 Section 2 DESCRIPTION Figure 2-3B Compressor Cooling and Lubrication System- Water-cooled...
  • Page 18 Section 2 DESCRIPTION Figure 2-4A Compressor Discharge System- Air-cooled...
  • Page 19 Section 2 DESCRIPTION Figure 2-4B Compressor Discharge System- Water-cooled...
  • Page 20 Section 2 DESCRIPTION Figure 2-5A Control System- START (Typical)
  • Page 21 Section 2 DESCRIPTION Figure 2-5B Control System MODULATION (Typical)
  • Page 22 Section 2 DESCRIPTION Figure 2-5C Control System- UNLOAD (Typical)
  • Page 23 Section 2 DESCRIPTION Figure 2-5D Control System- FULL LOAD (Typical)
  • Page 24: Air Inlet System, Functional Description

    Section 2 DESCRIPTION Figure 2-6 Compressor Air Inlet System to return to the full load (maximum) position. unload pressure reset to 100 psig. This ensures that the motor will not run in an overload condition. AUTOMATIC OPERATION For applications with varied periods of time when 2.7 AIR INLET SYSTEM, FUNCTIONAL DESCRIP- there are no air requirements, Supervisor’s Auto TION...
  • Page 25: Sullair Series Ts-32S Specifications

    (I) Add 1 in./2.5 cm for enclosure. Add 37 in./94 cm (200-350hp/149-261kw) for servicing the separator. (II) Add 1,040 lbs./ 472 kg for air-cooled enclosure package. (III) Add 1,800 lbs./ 816 kg for water-cooled enclosure package. For noise level information, please contact the Sullair Factory Service Department. COMPRESSOR: Type:...
  • Page 26: Lubrication Guide- 24Kt Compressors

    A 24KT sample should be sent in annually, after the first year. 3.4 APPLICATION GUIDE Sullair encourages the user to participate in a fluid analysis program with the fluid suppliers. This could result in a fluid change interval differing from that stated in the manual.
  • Page 27 Section 3 SPECIFICATIONS NOTES...
  • Page 28 Section 3 SPECIFICATIONS Figure 3-2A Identification- TS-32S 400HP/ 298KW (Typical) 02250137-710R00...
  • Page 29 Section 3 SPECIFICATIONS Figure 3-2B Identification- TS-32S 500-600HP/ 373-447KW (Typical) 02250137-150R02...
  • Page 30 Section 3 SPECIFICATIONS Figure 3-3A Piping and Instrumentation- Air-cooled 400HP/ 298KW (Typical) 02250136-089R01...
  • Page 31 Section 3 SPECIFICATIONS Figure 3-3A Piping and Instrumentation- Air-cooled 400HP/ 298KW (Typical) part number description number quantity filter, assy air inlet (heavy duty) 250006-718 vlv, inlet butterfly 8" 02250126 -220 control, Sullicon LS25S 011682-003 vlv, shuttle 1/4" 408893 vlv, spiral vlv, diff.
  • Page 32 Section 3 SPECIFICATIONS Figure 3-3B Piping and Instrumentation- Air-cooled 500-600HP/ 373-447KW (Typical) 02250136-092R02...
  • Page 33 Section 3 SPECIFICATIONS Figure 3-3B Piping and Instrumentation- Air-cooled 500-600HP/ 373-447KW (Typical) part number description number quantity filter, assy air inlet (heavy duty) 250006-718 vlv , inlet butterfly 8" 02250126 -220 control, Sullicon LS25S 011682-003 vlv, shuttle 1/4" 408893 vlv, spiral vlv, diff.
  • Page 34 Section 3 SPECIFICATIONS Figure 3-3B Piping and Instrumentation- Air-cooled 500-600HP/ 373-447KW (Typical) 02250136-092R02...
  • Page 35 Section 3 SPECIFICATIONS Figure 3-3B Piping and Instrumentation- Air-cooled 500-600HP/ 373-447KW (Typical) (continued) part number description number quantity separator, combo trap 250007-799 vlv, oil stop w/sae ports 02250122-004 vlv, ball 1 /2" npt 47117 switch, vac. 22" w. c. n4 02250078-249 drain, elec.
  • Page 36 Section 3 SPECIFICATIONS Figure 3-3C Piping and Instrumentation- Water-cooled 400-600HP/ 298-447KW (Typical) 02250136-088R02...
  • Page 37 Section 3 SPECIFICATIONS Figure 3-3C Piping and Instrumentation- Water-cooled 400-600HP/ 298-447KW (Typical) part number part number number description 400HP 500-600HP quantity filter, assy air inlet (heavy duty) 250006-718 250006-718 vlv, inlet butterfly 8" 02250126-220 02250126-220 control, Sullicon LS25S 011682-003 011682-003 vlv, shuttle 1 /4"...
  • Page 38 Section 3 SPECIFICATIONS Figure 3-3C Piping and Instrumentation- Water-cooled 400-600HP/ 298-447KW (Typical) 02250136-088R02...
  • Page 39 Section 3 SPECIFICATIONS Figure 3-3C Piping and Instrumentation- Water-cooled 400-600HP/ 298-447KW (Typical)(continued) part number part number number description 400HP 500-600HP quantity aftercooler, > 150# 02250053-383 aftercooler, <= 150# 409878-008 02250133-658 separator 250000-511 250007-799 vlv, oil stop w/sae ports 02250122-004 02250122-004 vlv, ball 1/2"...
  • Page 40 NOTES...
  • Page 41: Mounting Of Compressor

    Operator’s Manual. No piping loads shall be trans- sive pressure drop is not created across the fan. mitted to the compressor or the cooling package at Consult a Sullair office for assistance in utilizing this the external connections. heat. 4.2 VENTILATION AND COOLING...
  • Page 42: Fluid Piping (Remote Air-Cooled Option Only)

    The fluid necessary to fill The supply and return piping for the fluid cooler this piping may be ordered from the nearest Sullair...
  • Page 43: Electrical Preparation

    After the electrical wiring has been done, it is nec- state or local electrical code concerning isolation essary to check the direction of the motor rotation. switches, fuse disconnects, etc. Sullair provides a With the control system in MANUAL mode, press wiring diagram for use by the installer.
  • Page 44: Supervisor Control Panel

    Section 5 SUPERVISOR CONTROLLER Figure 5-1 Supervisor Control Panel For information concerning all aspects of the Supervisor Controller, consult the Supervisor Controller manual no. 02250133-517.
  • Page 45: Introduction

    Section 6 COMPRESSOR OPERATION 6.1 INTRODUCTION pose, location, and use. While Sullair has built into the TS-32S Series 6.2 PURPOSE OF CONTROLS package a comprehensive array of controls and All Supervisor Controller related functions and indi- indicators to assure its proper operation, the user...
  • Page 46: Initial Start-Up Procedure

    Section 6 COMPRESSOR OPERATION 6.2 PURPOSE OF CONTROLS (CONTINUED) CONTROL OR INDICATOR PURPOSE MINIMUM PRESSURE VALVE Maintains 50 psig (3.5 bar) in the receiver tank when the compressor is running loaded. Also incorporates a check valve, which prevents compressed air backflow from the sys- tem when unloaded or shutdown.
  • Page 47: Subsequent Start-Up Procedure

    Section 6 COMPRESSOR OPERATION the cooling system and installation environment should be checked. press the START or AUTO MODE button. When the compressor is running, observe the 8. Open shut-off valve to the service line. instrument panel and maintenance indicators. 9.
  • Page 48 NOTES...
  • Page 49: General

    Section 7 MAINTENANCE 7.1 GENERAL 7.5 FLUID CHANGE As you proceed in reading this section, it will be Standard models are filled with the long life lubri- easy to see that the Maintenance Program for the cant Sullube. air compressor is quite minimal yet important. The Sullube should be changed under the following con- use of the service indicators provided for the fluid fil- ditions, whichever occurs first:...
  • Page 50 Section 7 MAINTENANCE tions below. For element replacement order kit sary. When removing the primary element, always number 02250139-996. check the secondary element for visible dirt, grease or damage. The secondary element must be 1. Drain the fluid from the canister by removing the changed after every sixth primary element change.
  • Page 51 Section 7 MAINTENANCE Figure 7-3 Separator Element Replacement 3. If the clean element is to be stored for later use, it must be stored in a clean, closed container. 4. After the element has been installed, inspect and tighten, if necessary, all air inlet connections prior to resuming operation.
  • Page 52 Section 7 MAINTENANCE Figure 7-4 Oil Return/Sight Glass *Replacement Filter Assembly P/N 02250117-782 (271 Nm). 2. Unscrew male connector (for left-side glass), or the straight thread tube connector (for right-side 11. Reconnect all piping making sure return line glass) from sight glass/orifice blocks. tubes extend to the bottom or 1/4”...
  • Page 53 Section 7 MAINTENANCE Figure 7-5 Pressure Regulator Adjustments COMPRESSOR DRIVE COUPLING while coupling is in operation by using a strobe The performance and life of couplings depend light. Replace cracked discpacks and recheck largely upon how you install and maintain them. alignment.
  • Page 54 Section 7 MAINTENANCE Table 7-1 Installation Data Max. Operating Misalignment Adapter Bolt Coupling Drive Bolt Drive Bolt Tightening Coupling Parallel Capscrew Tightening Elongation Torque, Oiled Offset Angular Torque, Oiled Inches ft.-lbs./ Nm + .030 inches Inches Deg. Inches(I) ft.-lbs./ Nm 28/ 38 7.00 T.I.R.
  • Page 55 Section 7 MAINTENANCE Figure 7-8 Drive Coupling additional compression is required, tighten each Figure 7-9 Installation/Removal Bolts installation/removal bolt on each end an addi- tional 1/2 turn. 3. Refer to Figure 7-10. Dip adapter bolt threads in SAE 30 oil and insert bolts with lockwashers through hub flange holes and engage tapped holes in each adapter.
  • Page 56 Section 7 MAINTENANCE er elongation. Repeat this procedure for each Figure 7-11 Drive Bolt Tightening Pattern drive bolt in cylinder head fashion illustrated in Figure 7-11. SHRINK DISC INSTALLATION Refer to Figures 7-12 and 7-13. Shrink discs are supplied ready for installation. Therefore, they should not be disassembled prior to initial installa- tion.
  • Page 57: Troubleshooting Guide

    Should your problem persist after making the rec- 3. Pull shrink disc from hub. ommended check, consult your nearest Sullair rep- CLEANING AND LUBRICATION resentative or the Sullair Corporation. Removed shrink discs need not to be taken apart or lubricated prior to reinstallation.
  • Page 58 Section 7 MAINTENANCE 7.9 TROUBLESHOOTING GUIDE (I) (CONTINUED) SYMPTOM PROBABLE CAUSE REMEDY Excessive Operating Pressure Check maximum P2 pressure setting. COMPRESSOR SHUTS DOWN WITH AIR DEMAND PRESENT HIGH PRESS P1 display; Max P1 pressure may (CONTINUED) be set too low. Consult factory for recalibration. Defective solenoid valve;...
  • Page 59 Section 7 MAINTENANCE 7.9 TROUBLESHOOTING GUIDE (I) (CONTINUED) SYMPTOM PROBABLE CAUSE REMEDY Low Fluid Pressure Check fluid level. COMPRESSOR SHUTS DOWN (LOW PRESSURE P3 display) WITH AIR DEMAND PRESENT Check for clogged fluid filter. (CONTINUED) Low Water Pressure Check the cooling fan motor or water flow sys- (FAN OL/LOW WATER display) tem.
  • Page 60 NOTES...
  • Page 61: Procedure For Ordering Parts

    ILLUSTRATIONS AND PARTS LIST 8.1 PROCEDURE FOR ORDERING PARTS Parts should be ordered from the nearest Sullair Representative or the Representative from whom the com- pressor was purchased. If for any reason parts cannot be obtained in this manner, contact the factory directly at the address or phone numbers listed below.
  • Page 62: Recommended Spare Parts List

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.2 RECOMMENDED SPARE PARTS LIST - 400, 500 and 600HP/ 298, 373 and 447KW (CONTINUED) DESCRIPTION QUANTITY KIT NUMBER repair kit for solenoid valve 02250125-657 02250125-829 (valve) replacement coil for solenoid valve 02250125-657 02250125-861 (coil) repair kit for solenoid valve 02250125-679 02250125-824 replacement coil for solenoid valve 02250125-679...
  • Page 63 NOTES...
  • Page 64: Motor, Compressor, Frame And Parts- Gear Drive

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.3 MOTOR, COMPRESSOR, FRAME AND PARTS- GEAR DRIVE 02250135-723R03...
  • Page 65 Section 8 ILLUSTRATIONS AND PARTS LIST 8.3 MOTOR, COMPRESSOR, FRAME AND PARTS- GEAR DRIVE (CONTINUED) part number description number quantity block, motor adjust base 2” 02250059-262 screw, sqhd 0.5 x 3.5 cup set pt 02250112-193 guard, coupling TS32S center dd adjustable 02250113-561 guard, coupling l.h.
  • Page 66 Section 8 ILLUSTRATIONS AND PARTS LIST 8.3 MOTOR, COMPRESSOR, FRAME AND PARTS- GEAR DRIVE 02250135-723R03...
  • Page 67 (III) There is an exchange program whereby a remanufactured compressor unit can be obtained from Sullair distributors or the factory at less cost than the owner could repair the unit. For information regarding the unit exchange program, contact your nearest Sullair representative or the Sullair Corporation.
  • Page 68 Section 8 ILLUSTRATIONS AND PARTS LIST 8.4 MOTOR, COMPRESSOR, FRAME AND PARTS- DIRECT DRIVE 02250136-899R01...
  • Page 69 Section 8 ILLUSTRATIONS AND PARTS LIST 8.4 MOTOR, COMPRESSOR, FRAME AND PARTS- DIRECT DRIVE part number description number quantity block,motor adjust base 2” 02250059-262 screw, sqhd 0.5 x 3.5 cup set pt 02250112-193 guard, coupling lh TS32S dd adjust. 02250113-559 guard, coupling rh TS32S dd adjust.
  • Page 70 Section 8 ILLUSTRATIONS AND PARTS LIST 8.4 MOTOR, COMPRESSOR, FRAME AND PARTS- DIRECT DRIVE 02250136-899R01...
  • Page 71: Motor, Compressor, Frame And Parts- Direct Drive

    (III) There is an exchange program whereby a remanufactured compressor unit can be obtained from Sullair distributors or the factory at less cost than the owner could repair the unit. For information regarding the unit exchange program, contact your nearest Sullair representative or the Sullair Corporation.
  • Page 72: Air Inlet System

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.5 AIR INLET SYSTEM 02250135-499R01...
  • Page 73 Section 8 ILLUSTRATIONS AND PARTS LIST 8.5 AIR INLET SYSTEM part number description number quantity valve, 10” inl btfly TS32A 02250126-220 support, air filter TS32S 02250129-084 adapter, TS32SC air inlet 02250129-113 support,strap air flt TS32SC 02250133-621 tube, alum air inlet 8”od x 8.5”lg 025068 gasket, .06 x 10.5id x 13.25od 041079...
  • Page 74: Fluid Cooling System- Air-Cooled 400Hp/ 298Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.6 FLUID COOLING SYSTEM- AIR-COOLED 400HP/ 298KW 02250137-202R01...
  • Page 75 Section 8 ILLUSTRATIONS AND PARTS LIST 8.6 FLUID COOLING SYSTEM- AIR-COOLED 400HP/ 298KW part number description number quantity strip, weather 1” x 1/8” foam 02250058-345 panel, adapter 400hp clr pk 02250121-117 panel, adapter 400hp clr pk w/clean 02250121-118 saddle, motor supt 300/400hp clr pk 02250121-119 support, mtr 300/400hp clr pk 02250121-120...
  • Page 76 Section 8 ILLUSTRATIONS AND PARTS LIST 8.6 FLUID COOLING SYSTEM- AIR-COOLED 400HP/ 298KW 02250137-202R01...
  • Page 77 Section 8 ILLUSTRATIONS AND PARTS LIST 8.6 FLUID COOLING SYSTEM- AIR-COOLED 400HP/ 298KW (CONTINUED) part number description number quantity washer, pl-b reg pltd 5/16 838205-071 washer, pl-b reg pltd 3/8 838206-071 washer, pl-b reg pltd 1/2 838208-112 eyebolt, 5/16-18 x 1 1/8” pltd 839105-112 nut, retainer 5/16-18 .092 861405-092...
  • Page 78: Fluid Cooling System- Air-Cooled 500-600Hp/ 373-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.7 FLUID COOLING SYSTEM- AIR-COOLED 500-600HP/ 373-447KW 02250132-133R00...
  • Page 79 Section 8 ILLUSTRATIONS AND PARTS LIST 8.7 FLUID COOLING SYSTEM- AIR-COOLED 500-600HP/ 373-447KW part number description number quantity strip, weather 1” x 1/8” foam 02250058-345 panel, adapter 400hp clr pk 02250121-117 panel, adapter 400hp clr pk w/clean 02250121-118 saddle, motor supt 300/400hp clr pk 02250121-119 support, mtr 300/400hp clr pk 02250121-120...
  • Page 80 Section 8 ILLUSTRATIONS AND PARTS LIST 8.7 FLUID COOLING SYSTEM- AIR-COOLED 500-600HP/ 373-447KW 02250132-133R00...
  • Page 81 Section 8 ILLUSTRATIONS AND PARTS LIST 8.7 FLUID COOLING SYSTEM- AIR-COOLED 500-600HP/ 373-447KW (CONTINUED) part number description number quantity washer, pl-b reg pltd 1/2 838208-112 eyebolt, 5/16-18 x 1 1/8” pltd 839105-112 nut, retainer 5/16-18 .092 861405-092 bushing (III) fan (III) motor (III) nut (III) screw (III)
  • Page 82: Horizontal Remote Cooler- 600Hp/ 447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.8 HORIZONTAL REMOTE COOLER- 600HP/ 447KW 02250135-525R01...
  • Page 83 Section 8 ILLUSTRATIONS AND PARTS LIST 8.8 HORIZONTAL REMOTE COOLER- 600HP/ 447KW part number description number quantity support, corner 300/400hp rc 02250121-121 frame, rem clr 300/400 hp 02210121-124 panel, assembly side 300/400 hp rem clr 02250124-335 screw, self-drill 1/4 x 3/4 834504-075 capscr, hex gr5 3/8-16 x 1 1/2 829106-150...
  • Page 84: Fluid Cooling System- Water-Cooled 400Hp/ 298Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.9 FLUID COOLING SYSTEM- WATER-COOLED 400HP/ 298KW 02250137-154R04...
  • Page 85 Section 8 ILLUSTRATIONS AND PARTS LIST 8.9 FLUID COOLING SYSTEM- WATER-COOLED 400HP/ 298KW part number description number quantity support, wc aftclr/ac discharge pipe 02250128-850 support, after cooler TS32-400 02250129-208 supt-brace horizontal 400hp wcac 02250129-741 tube, wtrout to cust.conn.TS32SC-400 02250132-307 tube, cooler wtr out to frame TS32S-2” 02250132-308 tube, aftrclr to fram TS32S 02250132-361...
  • Page 86: Fluid Cooling System- Water-Cooled 500-600Hp/ 373-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.10 FLUID COOLING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW 02250137-343R01...
  • Page 87 Section 8 ILLUSTRATIONS AND PARTS LIST 8.10 FLUID COOLING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW part number description number quantity support, after cooler TS32-400 02250129-208 support, pipe 500 hp wc 02250129-694 cooler, 500hp plate TS32S 02250130-619 aftercooler, wc aftclr TS32SC 02250133-658 support, aftrclr brace TS32SC wc 02250133-775 bracket, 3”...
  • Page 88 Section 8 ILLUSTRATIONS AND PARTS LIST 8.10 FLUID COOLING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW 02250137-343R01...
  • Page 89 Section 8 ILLUSTRATIONS AND PARTS LIST 8.10 FLUID COOLING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW (CONTINUED) part number description number quantity washer, spr lock reg pltd 5/8 837810-156 washer, pl-b reg pltd 1/2 838208-112 washer, pl-b reg pltd 5/8 838210-112 u-bolt,1/2” x 3” pipe pltd 868308-300 u-bolt,1/2”...
  • Page 90: Air Piping System- Air-Cooled 400Hp/ 298Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.11 AIR PIPING SYSTEM- AIR-COOLED 400HP/ 298KW 02250137-367R01...
  • Page 91 Section 8 ILLUSTRATIONS AND PARTS LIST 8.11 AIR PIPING SYSTEM- AIR-COOLED 400HP/ 298KW part number description number quantity valve, minimum pressure 4” w/ck (I) 02250050-630 flange, split 4” sae j518 02250105-533 seperator, water ws1000 02250111-106 bracket, seperator mount 02250121-831 joint, expansion TS32-400intac mpv to clr 02250128-897 gasket, asa flange 150# 4”...
  • Page 92: Air Piping System- Air-Cooled And Remote-Cooled 500-600Hp/ 373-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.12 AIR PIPING SYSTEM- AIR-COOLED AND REMOTE-COOLED 500-600HP/ 373-447KW 02250136-709R01...
  • Page 93 Section 8 ILLUSTRATIONS AND PARTS LIST 8.12 AIR PIPING SYSTEM- AIR-COOLED AND REMOTE-COOLED 500-600HP/ 373-447KW part number description number quantity valve, minimum pressure 4” w/ck (I) 02250050-630 flange, split 4” sae j518 02250105-533 adapter, mpv to tube TS32SC 02250132-702 support, discharge pipe TS32SC-600 wc 02250133-191 adapter, tube air out TS32SC rc 02250134-054...
  • Page 94 Section 8 ILLUSTRATIONS AND PARTS LIST 8.12 AIR PIPING SYSTEM- AIR-COOLED AND REMOTE-COOLED 500-600HP/ 373-447KW 02250136-709R01...
  • Page 95 Section 8 ILLUSTRATIONS AND PARTS LIST 8.12 AIR PIPING SYSTEM- AIR-COOLED AND REMOTE-COOLED 500-600HP/ 373-447KW (CONTINUED) part number description number quantity union, pipe-brs seat 1 150# 871615-040 flange, thrd 4” various (III) (III) This part may vary by machine. Consult factory with machine serial number. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR...
  • Page 96: Air Piping System- Water-Cooled 400Hp/ 298Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.13 AIR PIPING SYSTEM- WATER-COOLED 400HP/ 298KW 02250137-255R02...
  • Page 97 Section 8 ILLUSTRATIONS AND PARTS LIST 8.13 AIR PIPING SYSTEM- WATER-COOLED 400HP/ 298KW part number description number quantity valve, minimum pressure 4” w/ck (I) 02250050-630 flange, split 4” sae j518 02250105-533 support, after cooler TS32-400 02250129-208 adapter, aftrclr TS32SC 400 wc 02250133-183 adptr, mpv to aftrclr TS32SC 400 wc 02250133-184...
  • Page 98: Air Piping System- Water-Cooled 500-600Hp/ 373-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.14 AIR PIPING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW 02250137-341R03...
  • Page 99 Section 8 ILLUSTRATIONS AND PARTS LIST 8.14 AIR PIPING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW part number description number quantity valve, minimum pressure 4” w/ck (I) 02250050-630 flange, split 4” sae j518 02250105-533 pipe, mpv to aftrclr TS32S 02250132-497 adapter, mpv to tube TS32SC 02250132-702 support, discharge pipe TS32SC-600 wc 02250133-191...
  • Page 100 Section 8 ILLUSTRATIONS AND PARTS LIST 8.14 AIR PIPING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW 02250137-341R03...
  • Page 101 Section 8 ILLUSTRATIONS AND PARTS LIST 8.14 AIR PIPING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW (CONTINUED) part number description number quantity u-bolt, 1/2” x 5” pipe pltd 868308-500 tee, pipe pltd 1 868430-040 union, pipe-brs seat 1 150# 871615-040 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR...
  • Page 102: Fluid Piping System- Air-Cooled 400Hp/ 298Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.15 FLUID PIPING SYSTEM- AIR-COOLED 400HP/ 298KW 02250137-118R00...
  • Page 103 Section 8 ILLUSTRATIONS AND PARTS LIST 8.15 FLUID PIPING SYSTEM- AIR-COOLED 400HP/ 298KW part number description number quantity adapter, sae 2-1/2-12 x 2-1/2-12 02250110-661 filter, 2 1/2-12 sae coreless 80cn-2 (I) 02250121-638 valve, oil stop 2.5” sae (II) 02250122-004 tube, unit to filter TS32 2” 02250132-287 tube, union to filter TS32S 2”...
  • Page 104: Fluid Piping System- Air-Cooled 500-600Hp/ 373-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.16 FLUID PIPING SYSTEM- AIR-COOLED 500-600HP/ 373-447KW 02250137-608R01...
  • Page 105 Section 8 ILLUSTRATIONS AND PARTS LIST 8.16 FLUID PIPING SYSTEM- AIR-COOLED 500-600HP/ 373-447KW part number description number quantity adapter, sae 2-1/2-12 x 2-1/2-12 02250110-661 filter, 2 1/2-12 sae coreless 80cn-2 (I) 02250121-638 valve, oil stop 2.5” sae (II) 02250122-004 tube, unit to filter TS32 2” 02250132-287 tube, union to filter TS32S 2”...
  • Page 106: Fluid Piping System- Water-Cooled 400Hp/ 298Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.17 FLUID PIPING SYSTEM- WATER-COOLED 400HP/ 298KW 02250137-125R00...
  • Page 107 Section 8 ILLUSTRATIONS AND PARTS LIST 8.17 FLUID PIPING SYSTEM- WATER-COOLED 400HP/ 298KW part number description number quantity adapter, sae 2-1/2-12 x 2-1/2-12 02250110-661 filter, 2 1/2-12 sae coreless 80cn-2 (I) 02250121-638 valve, oil stop 2.5” sae (II) 02250122-004 tube, unit to filter TS32 2” 02250132-287 tube, union to filter TS32S 2”...
  • Page 108: Fluid Piping System- Water-Cooled 500-600Hp/ 373-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.18 FLUID PIPING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW 02250137-342R01...
  • Page 109 Section 8 ILLUSTRATIONS AND PARTS LIST 8.18 FLUID PIPING SYSTEM- WATER-COOLED 500-600HP/ 373-447KW part number description number quantity adapter, sae 2-1/2-12 x 2-1/2-12 02250110-661 valve, thermal 2.5” sae 170deg (I) 02250120-955 filter, 2 1/2-12 sae coreless 80cn-2 (II) 02250121-638 valve, oil stop 2.5” sae (III) 02250122-004 tube, unit to filter TS32S 02250132-287...
  • Page 110: Fluid Piping System- Remote-Cooled 500-600Hp/ 373-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.19 FLUID PIPING SYSTEM- REMOTE-COOLED 500-600HP/ 373-447KW 02250135-799R02...
  • Page 111 Section 8 ILLUSTRATIONS AND PARTS LIST 8.19 FLUID PIPING SYSTEM- REMOTE-COOLED 500-600HP/ 373-447KW part number description number quantity adapter, sae 2-1/2-12 x 2-1/2-12 02250110-661 valve, thermal 2.5” sae 170deg (I) 02250120-955 filter, 2 1/2-12 sae coreless 80cn-2 (II) 02250121-638 valve, oil stop 2.5” sae (III) 02250122-004 2-1/2”...
  • Page 112 Section 8 ILLUSTRATIONS AND PARTS LIST 8.19 FLUID PIPING SYSTEM- REMOTE-COOLED 500-600HP/ 373-447KW 02250135-799R02...
  • Page 113 Section 8 ILLUSTRATIONS AND PARTS LIST 8.19 FLUID PIPING SYSTEM- REMOTE-COOLED 500-600HP/ 373-447KW (CONTINUED) part number description number quantity washer, spr lock reg pltd 1/2 837808-125 washer, pl-b reg pltd 1/2 838208-112 bushing, red pltd 1/2 x 1/4 867102-010 capscrew, ferry head hd pltd 1/2-13 x 3 867308-300 u-bolt, 3/8”...
  • Page 114: Sump And Parts

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.20 SUMP AND PARTS 02250135-534R03...
  • Page 115 Section 8 ILLUSTRATIONS AND PARTS LIST 8.20 SUMP AND PARTS part number description number quantity connector, flex 1/4t x 1/4p 020169 plug, sight glass 1-7/8” sae 02250097-611 connector, tube male bhd 1/4 x sae 02250101-490 filter, asembly genisis filter (I) 02250117-782 valve, ball 3/4”sae x 3/4”npt 02250125-221...
  • Page 116 Section 8 ILLUSTRATIONS AND PARTS LIST 8.20 SUMP AND PARTS 02250135-534R03...
  • Page 117 Section 8 ILLUSTRATIONS AND PARTS LIST 8.20 SUMP AND PARTS (CONTINUED) part number description number quantity elbow, pipe 90m/f 1/4 x 1/4 860704-025 elbow, pipe 90 deg plt 2” 866215-080 nipple, pipe-xs plt 2 x cl 866432-000 plug, pipe 3/4” 3000# stl plt 866900-030 nipple, pipe-hx pltd 3/4 x 3/4 868512-075...
  • Page 118: Sullicon Control

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.21 SULLICON CONTROL 02250134-158R00...
  • Page 119 Section 8 ILLUSTRATIONS AND PARTS LIST 8.21 SULLICON CONTROL part number description number quantity lever, control Sullicon 011084 plunger 020094 stop, control 020864 washer, back-up (I) 021172 body, control 021635 cover, control 021654 bolt, adj sullicon spring yellow zinc 02250112-184 pin, yoke 1/4”...
  • Page 120: Compressor Spiral Valve Actuator

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.22 COMPRESSOR SPIRIAL VALVE ACTUATOR...
  • Page 121 Section 8 ILLUSTRATIONS AND PARTS LIST 8.22 COMPRESSOR SPIRIAL VALVE ACTUATOR part number description number quantity shaft, valve - direct 250030-981 •shaft, valve - geared 250030-982 valve, weight counterbalance 250016-193 capscrew, socket 3/8”-16 x 1” 828906-100 ring, retaining 499068-005 bearing, ball 499002-207 seal, lip 250016-200...
  • Page 122: A Moisture Drain- 400Hp/ 298Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.23A MOISTURE DRAIN- 400HP/ 298KW (02250137-280) 8.23B MOISTURE DRAIN- 500-600HP/ 373-447KW (02250137-344) 400HP/ 298KW 02250137-280R00 500-600HP/ 373-447KW 02250137-344R01...
  • Page 123 Section 8 ILLUSTRATIONS AND PARTS LIST 8.23A MOISTURE DRAIN- 400HP/ 298KW (02250137-280) part number description number quantity drain, electric condensate - scd400 (I) 02250130-866 valve, ball 1/2”npt 047117 connector, tube-strt 1/2”mnpt x 1/2”tube 250024-695 connector, tube-el 3/8”npt x 1/2”tube 250024-713 tubing, 1/2 thermoplastic 250030-855 4 ft.
  • Page 124: Pneumatic Controls

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.24 PNEUMATIC CONTROLS 02250135-643R05...
  • Page 125 Section 8 ILLUSTRATIONS AND PARTS LIST 8.24 PNEUMATIC CONTROLS part number description number quantity locknut, n4 conduit sealing 02250071-362 grip, cord n4 .125 -.187 x 1/2” 02250071-379 grip, cord n4 .250-.375 x 1/2” 02250071-381 switch, vacuum 22”wc n4 6ft cable 5a 02250078-249 transducer, pressure 0-25psi 1-5vdc n4 02250078-933...
  • Page 126 Section 8 ILLUSTRATIONS AND PARTS LIST 8.24 PNEUMATIC CONTROLS 02250135-643R05...
  • Page 127 Section 8 ILLUSTRATIONS AND PARTS LIST 8.24 PNEUMATIC CONTROLS (CONTINUED) part number description number quantity nipple, conduit 1/2 x 1.125” 250007-168 nipple, conduit 1/2 x 1.5” 250007-169 elbow, 90 1/4t pls x 1/4 npt m 250018-430 grip, cord so 12/4 st 1/2” 250018-495 valve, diff press reg 1/4”npt (VI) 406929...
  • Page 128 Section 8 ILLUSTRATIONS AND PARTS LIST 8.24 PNEUMATIC CONTROLS 02250135-643R05...
  • Page 129 Section 8 ILLUSTRATIONS AND PARTS LIST 8.24 PNEUMATIC CONTROLS (CONTINUED) part number description number quantity elbow, pipe-90m 1/4 x 1/4 860504-025 elbow, pipe 90f 1/4 x 1/4 860604-025 elbow, pipe 90m/f 1/4 x 1/4 860704-025 elbow, pipe 90m/f 3/8 x 1/2 860706-050 tee, pipe 150# plt 1/4 866815-010...
  • Page 130: Control Box- Solid State (Typical)

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.25 CONTROL BOX- SOLID STATE (TYPICAL) 02250122-005R04...
  • Page 131 Section 8 ILLUSTRATIONS AND PARTS LIST 8.25 CONTROL BOX- SOLID STATE (TYPICAL) part number description number quantity enclosure 02550108-859 door 02550109-465 bezel 02250089-302 beze; gasket 02550090-872 I/0 module 02250141-089 display module 02250119-330 display gasket 02250048-822 primary fuse 305 amp 250026-648 secondary fuse 5 amp 250019-751 univ.
  • Page 132: Control Box- Full Voltage (Typical)

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.26 CONTROL BOX- FULL VOLTAGE (TYPICAL) 02250122-511R04...
  • Page 133 Section 8 ILLUSTRATIONS AND PARTS LIST 8.26 CONTROL BOX- FULL VOLTAGE (TYPICAL) part number description number quantity enclosure 02550108-859 door 02550109-465 bezel 02250129-958 bezel gasket 02550090-872 I/O module 02550141-089 transformer 24v 02250135-283 primary fuse 3.5 amp 250026-648 secondary fuse 5 amp 250019-751 univ.
  • Page 134: Control Box- Wye-Delta (Typical)

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.27 CONTROL BOX- WYE-DELTA (TYPICAL) 02250122-516R08...
  • Page 135 Section 8 ILLUSTRATIONS AND PARTS LIST 8.27 CONTROL BOX- WYE-DELTA (TYPICAL) part number description number quantity ground bus 02550110-334 univ. 250 va trans 02250083-188 primary fuse 2.5 amp 250026-646 secondary fuse 3 amp 250019-758 ground bar 02550101-721 univ. 350 va trans 02250083-190 primary fuse 3.5 amp 250026-648...
  • Page 136: Insulation- Air-Cooled 400-600Hp/ 298-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.28 INSULATION- AIR-COOLED 400-600HP/ 298-447KW 02250135-448R03...
  • Page 137 Section 8 ILLUSTRATIONS AND PARTS LIST 8.28 INSULATION- AIR-COOLED 400-600HP/ 298-447KW part number description number quantity panel, acoustic foam 5.25 x 63 x 2 02250127-687 panel, acoustic foam 5.5 x 30 x 2 02250127-689 panel, acoustic foam 14.5 x 31 x 2 02250127-691 panel, acoustic foam 33 x 33.75 x 2 02250127-694...
  • Page 138: Insulation- Water-Cooled And Remote-Cooled 400-600Hp/ 298-447Kw

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.29 INSULATION- WATER-COOLED AND REMOTE-COOLED 400-600HP/ 298-447KW 02250135-463R04...
  • Page 139 Section 8 ILLUSTRATIONS AND PARTS LIST 8.29 INSULATION- WATER-COOLED AND REMOTE-COOLED 400-600HP/ 298-447KW part number description number quantity panel, acoustic foam 5.25 x 63 x 2 02250127-687 panel, acoustic foam 5.5 x 30 x 2 02250127-689 panel, acoustic foam 14.5 x 31 x 2 02250127-691 panel, acoustic foam 33 x 33.75 x 2 02250127-694...
  • Page 140: Enclosure- Air-Cooled

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.30 ENCLOSURE- AIR-COOLED 02250133-674R04...
  • Page 141 Section 8 ILLUSTRATIONS AND PARTS LIST 8.30 ENCLOSURE- AIR-COOLED part number description number quantity strip, weather 1” x 1/8” foam 02250058-345 150 ft panel, sill short TS32S 02250124-938 panel, header 60” str TS32 encl 02250124-942 panel, roof motor side TS32A-300/350a 02250127-100 panel, sill TS32A 02250129-475...
  • Page 142 Section 8 ILLUSTRATIONS AND PARTS LIST 8.30 ENCLOSURE- AIR-COOLED 02250133-674R04...
  • Page 143 Section 8 ILLUSTRATIONS AND PARTS LIST 8.30 ENCLOSURE- AIR-COOLED (CONTINUED) part number description number quantity panel, canopy header grille TS32S w/63” 02250138-949 support, corner-str (63”box) TS32S 02250139-442 grommet, rubber 040125 handle, canopy 042262 nut, hex pltd 1/4-20 825104-226 nut, hex f pltd 5/16-18 825305-283 nut, hex locking 5/16-18 825505-166...
  • Page 144: Enclosure- Water-Cooled

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.31 ENCLOSURE- WATER-COOLED 02250133-675R04...
  • Page 145 014613 strip, weather 1” x 1/8” foam 02250058-345 12 ft. nameplate, sullair serial number 02250059-318 panel, sill short TS32A 02250124-938 panel, header 60” str TS32 encl 02250124-942 panel, sill TS32A 02250129-475 hinge, separator access door 02250129-761 hinge, 180deg.
  • Page 146 Section 8 ILLUSTRATIONS AND PARTS LIST 8.31 ENCLOSURE- WATER-COOLED 02250133-675R04...
  • Page 147 Section 8 ILLUSTRATIONS AND PARTS LIST 8.31 ENCLOSURE- WATER-COOLED (CONTINUED) part number description number quantity handle, canopy 042262 clamp, wire 043194 spacer, fan support 227267 fan, 20” 245748 nut, hex pltd 1/4-20 825104-226 nut, hex pltd 7/16-14 825207-385 nut, hex f pltd 5/16-18 825305-283 nut, hex locking 5/16-18 825505-166...
  • Page 148: Decals

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.32 DECALS...
  • Page 149 “food grade” lube 250003-144 decal, warning actuator 250029-836 sign, warning “compressor fluid fill cap” 049685 sign, air breathing (danger) 250027-935 decal, Sullair logo 02250059-048 (Continued on page 145) PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR...
  • Page 150 Section 8 ILLUSTRATIONS AND PARTS LIST 8.32 DECALS...
  • Page 151 Section 8 ILLUSTRATIONS AND PARTS LIST 8.32 DECALS (CONTINUED) part number description number quantity sign, warning ground fault 049852 decal, warning auto start 250017-903 decal, autostart 041065 decal, danger high voltage 042218 decal, water inlet-outlet 049873 decal, water in 250019-107 decal, water out 250019-108 decal, fluid Sullube...
  • Page 152 Section 8 ILLUSTRATIONS AND PARTS LIST 8.32 DECALS...
  • Page 153 Section 8 ILLUSTRATIONS AND PARTS LIST 8.32 DECALS (CONTINUED) part number description number quantity decal, TS-32 02250061-379 decal, compressor fluid 24KT 02250061-022 decal, rotation 250021-564 decal, rotation 250021-286 decal, ISO 9001 (I) decal, fluid sample 250022-675 decal, electrical component ID 250038-457 sign, power energized 249544-049...
  • Page 154: Decal Locations

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.33 DECAL LOCATIONS...
  • Page 155 049850 decal, warning auto start 250017-903 sign, warning sever - fan 049855 decal, Sullair logo 02250059-048 decal, TS-32 02250061-379 decal, ISO 9001 (I) decal, autostart 041065 decal, water drain 250022-810 decal, OSV pn 016742...
  • Page 156: Decal Locations- Air-Cooled Enclosure

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.34 DECAL LOCATIONS- AIR-COOLED ENCLOSURE (TYPICAL)
  • Page 157 250017-903 sign, warning sever - fan 049855 decal, TS-32 02250061-379 decal, 24KT (I) 02250061-022 decal, ISO 9001 (II) decal, Sullair logo 02250059-048 decal, fork lifting 241814 sign, air breathing (danger) 250027-935 sign, warning “food grade” lube 250003-144 (I) Decal is valid for machines using 24KT fluid only.
  • Page 158: Decal Locations- Water-Cooled Enclosure

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.35 DECAL LOCATIONS- WATER-COOLED ENCLOSURE (TYPICAL)
  • Page 159 - fan 049855 decal, warning auto start 250017-903 decal, autostart 041065 decal, ISO 9001 (II) decal, 24KT (I) 02250061-022 decal, Sullair logo 02250059-048 decal, TS-32 02250061-379 sign, warning sever-fan port 049965 sign, warning sever - fan 049855 decal, rotation 250021-564 (I) ISO decal may vary per machine.
  • Page 160: Decal Locations- Control Box

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.36 DECAL LOCATIONS- CONTROL BOX...
  • Page 161 Section 8 ILLUSTRATIONS AND PARTS LIST 8.36 DECAL LOCATIONS- CONTROL BOX part number description number quantity decal, protective earth ground 02250075-045 decal, danger high voltage 042218 decal, V 460/3/60 international 02250069-399 •decal, V 575/3/60 international 02250069-400 •decal, V 380/3/50 international 02250069-412 •decal, V 230/3/60 international 02250069-397...
  • Page 162: Decal Locations- After-Cooler

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.37 DECAL LOCATIONS- AFTER-COOLER...
  • Page 163 049965 sign, warning sever - fan 049855 decal, rotation 250021-564 sign, warning sever fan door closed 02250131-539 decal, Sullair 4.5 x 36 black 02250057-603 decal, fork lifting 241814 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR...
  • Page 164: Wiring Diagram- Air-Cooled/Full Voltage

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.38 WIRING DIAGRAM- AIR-COOLED/FULL VOLTAGE 02250130-732R01...
  • Page 165: Wiring Diagram- Water-Cooled/Full Voltage

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.39 WIRING DIAGRAM- WATER-COOLED/FULL VOLTAGE 02250130-726R01...
  • Page 166: Wiring Diagram- Air-Cooled/Wye-Delta

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.40 WIRING DIAGRAM- AIR-COOLED/WYE-DELTA 02250130-730R02...
  • Page 167: Wiring Diagram- Water-Cooled/Wye-Delta

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.41 WIRING DIAGRAM- WATER-COOLED/WYE-DELTA 02250130-728R01...
  • Page 168: Wiring Diagram- Air-Cooled/Solid State

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.42 WIRING DIAGRAM- AIR-COOLED/SOLID STATE 02250130-731R02...
  • Page 169: Wiring Diagram- Water-Cooled/Solid State

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.43 WIRING DIAGRAM- WATER-COOLED/SOLID STATE 02250130-727R02...
  • Page 170: Wiring Diagram- Air-Cooled/Remote-Cooler

    Section 8 ILLUSTRATIONS AND PARTS LIST 8.44 WIRING DIAGRAM- AIR-COOLED/REMOTE COOLER 02250130-723R01...
  • Page 171 NOTES...
  • Page 172 WORLDWIDE SALES AND SERVICE SULLAIR ASIA, LTD. SULLAIR EUROPE, S.A. Sullair Road, No. 1 Zone Des Granges BP 82 Chiwan, Shekou 42602 Montbrison Cedex, France Shenzhen, Guangdong PRV. Telephone: 33-477968470 PRC POST CODE 518068 Fax: 33-477968499 Telephone: 755-6851686 www.sullaireurope.com Fax: 755-6853473 www.sullair-asia.com...

Table of Contents