Avaya XT Series XT5000 Series XT4000 Series User Manual page 84

Moderating Meetings
the duration of your recorded session and the speed of your network connection. Typical transfer
time for 4GB file (size of a recorded session of 5 hours at 2048K, 1080p) is around 30 minutes.
During the file transfer you can monitor the progress of a file transfer, represented by a blue bar
over the file preview in the playback page. A special icon is also shown in the XT Series GUI title
bar to indicate that the transfer is still in progress. If you shut down the XT Series or unplug the
USB key while a file transfer is in progress, the transfer will be interrupted and you will need to
restart it manually from the XT Series Web interface. A special icon over the file will show that the
transfer failed.
You can view recordings from the local USB storage device either on the XT Series or using any
standard media player. The system saves the file as an MP4, and records the video in H.264
format with audio in AAC-LC format. You can view recordings saved to the network via the Avaya
®
Equinox Unified Portal (see Using Avaya Equinox
If using a USB device to record a videoconference hosted by your built-in MCU, up to six remote
endpoints can join the meeting (if your license is MCU 9). If your license is MCU 4, up to three
remote endpoints can join. If more remote endpoints already joined, you cannot start a recording.
Important:
Any recordings you make are not authorized by the manufacturer and are made at the sole
responsibility and liability of the user.
Recorded videoconferences use one monitor only. During recording, the auxiliary monitor displays
the same video layout as the primary monitor.
Before you begin
• To record to a local USB storage device, insert it in the lower USB port on the XT Series. Use
a USB storage device formatted with FAT32, EXT2, EXT3, EXT4. Other formats, even if
supported, are not recommended.
• To record directly to the network, your Equinox Solution must include a recording server, the
XT Series must be managed by Equinox Management, and the meeting must be hosted by
an external Scopia Elite MCU or the Equinox Conferencing Media Server (or an older model).
The endpoint must be accessible remotely by Equinox Management with its address in the
remote access settings (see Deployment Guide for Avaya XT Series). For more information,
contact your system administrator.
• (Optional) Customize your recording settings for local USB recording, such as video
resolution, as described in
increase the recording time allowed, lower the recording bitrate.
June 2019
Figure 49: Connecting a USB drive to the XT Series
Enabling and Configuring Recording
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
®
Unified Portal).
on page 92. For example, to
84