Avaya XT Series XT5000 Series XT4000 Series User Manual page 45

2. To dial a recently contacted endpoint, access the recent calls list. From the XT Series web
interface, select Make your call > Basic Options > Recent Calls. From the endpoint's
main menu, select Call , or press
Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
Unit.
3. To dial a saved contact, access the list of contacts. From the XT Series web interface,
select Make your call > Contacts. From the endpoint's main menu, select Contacts.
Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
Unit.
4. To join a meeting hosted elsewhere, call the endpoint or MCU which hosts the meeting,
using any of the above dial methods.
5. To host a meeting on your built-in MCU by dialing out to other participants:
a. Call the first participant (see
b. Call others to join. From the XT Series web interface, select Make your Call > Basic
Options > Direct Call / Contacts. From the endpoint, within the meeting with the first
participant, press ok/menu and select Participants > Invite a new participant > By
Address / From Contacts.
c. Select a contact or enter a dial string to call the next participant.
d. Repeat to add more participants.
6. To host a meeting on your built-in MCU by giving your endpoint's contact details, be sure to
give the correct information.
To accept an incoming call, select Accept.
June 2019
on the XT Remote Control Unit.
Starting a Meeting
Figure 23: Invite Participant
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
Starting a Meeting
on page 43).
45