Avaya XT Series XT5000 Series XT4000 Series User Manual page 36

Getting Started
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Basic Settings with the Quick Setup Wizard
Procedure
1. Define the name and language.
2. To adjust the image on your monitor, select Next and continue with
Position on page 36.
If performing the quick setup from the web interface, access the quick setup from the
endpoint to adjust the image. This can be done at any time.
Related links
Configuring Basic Settings with the Quick Setup Wizard
Adjusting the Image Position
About this task
You can center the endpoint's image correctly on its monitor in this stage of the Quick Setup
Wizard.
This is for deployments with a monitor connected to your Avaya XT Series.
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
2. Decide if the monitor's image needs adjusting, by verifying if the white border of the
triangles in the top left and bottom right corners are fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
3. Press 1 to highlight the triangle in the top left corner in blue.
4. Use the arrow keys to position the image, so all sides of the white border of the triangle are
visible in the screen, then press ok/menu.
5. Press 2 to highlight the triangle in the bottom right corner in blue.
6. Adjust the image position in the same way, until all sides of the triangle border are visible,
then press ok/menu.
7. To continue with the Quick Setup Wizard, select Next (see
Settings on page 37).
If your monitor is 4K and your system is an Avaya XT7000 Series, graphic adjustment is
not applied.
Related links
Configuring Basic Settings with the Quick Setup Wizard
June 2019
on page 34.
on page 34.
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
Adjusting the Image
on page 34
Configuring Basic
Configuring Basic Network
on page 34
Configuring
36