Avaya XT Series XT5000 Series XT4000 Series User Manual page 109

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Deployment Guide for Avaya XT Series.
Procedure
1. From the endpoint's main menu, select Configure > Advanced > Utilities > Restore
System > Factory Defaults.
2. Confirm you want to remove all configurations.
The default settings are restored.
June 2019
Figure 60: Factory Defaults
Figure 61: Confirmation Warning
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
Restoring Default User Settings
109