Avaya XT Series XT5000 Series XT4000 Series User Manual page 47

Table 6: Entering advanced call properties
Field Name
Call Protocol
Call Type
Rate or Call Rate
Your call is securely encrypted when it shows a padlock icon
system administrator to configure encryption (see Deployment Guide for Avaya XT Series).
Important:
Using encryption is subject to local regulation. In some countries it is restricted or
limited for usage. For more information, consult your local reseller.
8. To end a meeting, select Disconnect from the web interface, or press Disconnect
the XT Remote Control Unit.
If your system administrator defined a time limit for embedded videoconferences, the
system displays a message when the limit is reached.
If the XT Series is participating in an Equinox Conferencing meeting where information
about the meeting and the participants are available, the XT Series displays an alert when
this meeting is going to terminate. You can decide to ignore the termination warning and
have the meeting terminate in 5 minutes or you can snooze the duration for half an hour.
Related links
Starting a New Call
June 2019
Description
If necessary, select the protocol to use when calling another
personal endpoint or meeting room:
• Select H.323 for H.323 endpoints, such as other XT Series
• Select SIP for SIP endpoints.
• Select ISDN to call ISDN endpoints. This requires an ISDN
Select whether the call is Audio-Video or Audio-Only.
Select the bandwidth to be used when calling a remote
endpoint. Otherwise, the system uses the maximum available
bandwidth.
Figure 26: Meeting Duration Alert
on page 43
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
endpoints, or when joining a meeting hosted by the Scopia
Elite MCU or the Equinox Conferencing Media Server.
gateway such as Avaya Equinox
Deployment Guide for Avaya XT Series).
Starting a Meeting
®
Gatewayfor ISDN (see
on the monitor. Ask your
on
47